Please select your home edition
Edition
Upffront 2020 Foredeck Club LEADERBOARD

Top Tips on How to Prep Your Boat for Spring

by Dave Proctor 23 Mar 09:00 GMT
Top Tips on How to Prep Your Boat for Spring © upffront.com

Spring is approaching and we start to think about getting our boats ready for the coming season. And whilst there are some jobs that are obvious, like servicing engines, repainting, varnishing woodwork, and checking sails, here is my list of ten jobs that could easily be overlooked but are potentially critical for you to enjoy a safe season ahead.

This list is not exhaustive, but should give you food for thought!

Standing Rigging

Check every item of your standing rigging, examining any wear and tear to masts, stays and shrouds, paying particular attention to the areas where these join onto the deck and to the masts. Check that Lifelines, stanchions, and pulpits are free from corrosion and properly tensioned.

Recent developments in the yachting world have produced lighter, more robust stays and composite hardware, and it may be worth examining such items to see if they would benefit you and your boat.

Sheets, Halyards and control lines

Check for any wear and tear on running rigging, both the hardware on the lines as well as the lines themselves. Check the splices on the end of sheets and wear points around winches.

Particular care should be taken to ensure that the halyards are free from snags and fraying. Key points to check are where they sit in jammers and exit halyard sheaves. Remember these lines are extremely difficult to replace should they fail when you are at sea.

It may also be the right moment to think about whether the halyards on your boat are the best for your boat.

Winches, Clutches and Cleats

Check that these items work properly, that they operate efficiently, and that they are not corroded. Most can be stripped down relatively easily and service kits are available for all winches. Spare/replacement cams can be bought for most clutches/jammers which can significantly improve grip on halyards. Apply lubricants and greases as appropriate.

Mooring equipment

Again inspect every part of your mooring equipment. Ensuring that you open up and examine your mooring chain and any rode for corrosion or wear. Check the inflation of fenders and ascertain if they have become brittle. Replacing them as necessary.

Dirty fenders are normally soiled by grease and oils, which will in time mark the hull of your boat, so consider using sock covers.

Electric system and lights

Electrical systems should be checked and you may want to consider upgrading your systems. For example, modern LED navigation lights are far more effective, use less power and last longer.

Safety equipment

Now is definitely the time to ensure that every piece of safety equipment is ready, available and fit for purpose. Lifejackets should be serviced and stored ready for use by you and your crew. If you have a liferaft, it should be serviced and meet your requirements, considering the number of crew and where you will be sailing.

Is your 'Man Overboard' equipment fully functional and ready for use? If you have a grab bag, examine its content, replace expired foodstuffs and check batteries and lights are operational.

Flares

Do these meet the regulations of the countries where you will be travelling to and are they in date? Remember these pyrotechnical devices deteriorate over time and can become dangerous. Also check their storage, which should be watertight and away from electrical systems and naked flames. Any out-of-date stock should be properly disposed of.

Fire extinguishers and alarms

Fire extinguishers and fire alarms as well as Carbon Monoxide alarms are, to my mind, essential items on board a boat. Are they working, and appropriately serviced?

Gas Appliances

It is very important to check your gas system thoroughly. Is the locker holding the bottle secure and does it allow any leaked LPG to drain effectively from the lowest point of the locker? The hoses should not have perished. They should also be in date (normally five years from the date of manufacture) and the connections should be corrosion free.

Remember LPG is heavier than air and any leakage could cause gas to accumulate in the lowest point of the bilge. A potentially explosive situation.

Hoses and apertures

A thorough check of all the hoses in your boat, whether they carry fuel, water, waste or anything else. You should also check any through-hull apertures, and the appropriate seacocks are working properly.

Critters

The problem with either rodents or birdlife living on your boat is the damage that they can cause. The easiest way to determine if you have any uninvited guests is from their droppings.

Summary

Remember, if you use items that are out of date or have not been serviced, there is nothing to confirm that they will work, and you may be in breach of your insurance.

I know this all seems rather a lot of work but ensuring your boat is both and properly set for the coming season could alleviate any later problems.

If you have any questions regarding this article or want expert, impartial advice on any aspect of your boat's equipment, please feel free to contact us by email, at or click the link below:

Speak to the team

Related Articles

Stacking Bags from Outils Oceans
The number one below deck stowage solution for offshore race yachts In this article we take a brief look at why French manufacturer Outils Oceans are the number one below deck stowage solution for offshore race yachts. How many can you count in the above image taken on board 11th Hour Racing during The Ocean Race? Posted on 3 Jun
Spinnaker Snuffers - Better Than Furling?
upffront.com gives you the detailed answer A snuffer is a simple, reliable method of dousing an asymmetric spinnaker. Despite advances in furling technology, snuffers remain the first choice for many offshore race yachts such as Class 40 and IMOCA. Posted on 25 May
Discovering Ronstan
The ultimate introduction to quality and innovative solutions If there is one brand name that is synonymous with quality and innovative marine products specifically designed and engineered for sailors, it's Ronstan. This marque is renowned throughout the Sailing World. Posted on 19 May
Robline rope configurator
New customisable products from upffront.com even include splices Upffront.com recently added a range of Robline ropes to the configurable product range, allowing you to choose splicing options and purchase finished sheets and halyards directly online. Posted on 12 May
Jefa Autopilot Direct Drives - Simply the Best?
What makes up a good autopilot system and why the details matter The Jefa direct drives are something of a hallmark in autopilot drive engineering. Every aspect has been designed from the ground up to create an efficient, powerful and long-lasting pilot drive. Posted on 3 May
Adding a staysail?
Mast hardware options - a guide by upffront.com We have previously reported on the benefits of adding a staysail. But what about the mast fitting? For people looking to retrofit a staysail on a rig without an existing staysail sheave or tang, this can often be the crunch point. Posted on 27 Apr
The Importance of Teamwork in Sailing
upffront.com look at briefings, language and safety We cannot think of another sport where the importance of teamwork is so vital both before and during the actual event. Whether that event is a leisurely cruise or an ocean-going race. Posted on 19 Apr
Get Ready to Kedge
Anchoring for race yachts The practice of kedging has been used for hundreds of years as a method of manoeuvring or orienting a sailing vessel against tide and wind. A kedge anchor is typically smaller and lighter than the primary anchor, making it easier to handle. Posted on 12 Apr
Luff Foil versus Hanks
Which is best for you? upffront.com detail the considerations For racing yachts and cruiser/racers with a fixed (non-furling) headstay there are really two possible methods of attaching the luff of the jib to the wire or rod forestay: in a luff foil, or with hanks. Posted on 5 Apr
A Guide to Bowsprit Configuration
Carbon or aluminium, furling or non-furling, and what is needed to 'peel' A bowsprit is now an almost inevitable feature of a racing yacht or performance cruiser and there are also a number of off-the-shelf retrofit options available. The uptake is due in part to the popularity of asymmetric downwind sails. Posted on 29 Mar