Please select your home edition
Nautical ID 2021 - LEADERBOARD

Global Solo Challenge: Sailboats with foils - the evolution seen by Sirena, Soldini and Pedote

by Global Solo Challenge 15 Jul 12:02 BST
Charal leads the Vendée-Arctique-Les Sables d'Olonne Race © Gauthier Lebec / Chara

In this article we tried to consult authoritative voices of sailing in explaining the evolution of sailboats with foils. Max Sirena of Luna Rossa, Giovanni Soldini of Maserati and Giancarlo Pedote of Prysmian Ocean Racing - IMOCA class.

However, we also wanted to explain before moving on to the actual interviews why there are currently three "currents of thought" in the world of foils for sailboats. First, the purely flying monohulls like those of the America's Cup, then flying multihulls, flying but capable of facing the oceans like Maserati, and then the partially flying monohulls like the IMOCA and the Mini 650.

As you can imagine, the three types are linked to the different rules, which in turn reflect different objectives and ways of facing the sea and navigation.

For the sake of completeness we should point out that there is a thriving world of other types of foilers. For example, inshore flying catamarans, legacy and evolution of the previous America's Cup. Many dinghies are also emerging in addition to the first flying dinghy, the Moth. Foils have also entered the world of windsurfing and kytes.

Sailboats with foils - Luna Rossa Prada Pirelli The increasingly widespread use of foils for all types of boats prefigures one of the most drastically and rapidly innovative historical moments, comparable to the introduction in the 1800s of the modern forms of jib and mainsail: today, as then, the paradigms of navigation seem to be definitively changing.

An introduction on foiling sailboats

If we talk about sailboats with foils we must first of all specify what is meant, since every sailboat is naturally equipped with many "foils". In fact, in its semantic definition the "foil" is a "profile" capable of generating a force when it crosses a fluid. For example, sails have a "profile" very similar to that of an airplane wing and are therefore foils. Being flexible they change concavity on each tack. But it is precisely their air-foils that allows a boat to go upwind.

Even the fin of a keel or a rudder, if we observe the section, has its own profile, this time symmetrical, unlike a sail which has an asymmetrical profile. The study of the forces generated by sails, keels, hulls and rudders is a very complex subject, and the optimisation of shapes in naval engineering is constantly evolving, as can be observed looking at the boats produced today compared to those of only ten years ago.

For example, the keel in contrasting leeway also manages to create a force, called "lift", which "pulls" the boat to windward. This is because of the leeway the profile of the foil has an angle of incidence with respect to the water that is not equal to zero (even if we do not notice it and we think we are going perfectly straight). The water then hits the keel at a slight angle and this means that despite being symmetrical, the keel foil generates an upwind lift and allows us to go upwind better.

Based on the same principle, the rudder blade also generates an upwind lift when sailing upwind. The sails work as foils as long as they are hit by a "laminar" air flow that follows the sail. On the other hand, when the sail simply opposes the wind from behind we travel in a turbulent flow and we are not talking about foils.

Sailboats with foils: so what is meant?

Keel and rudder have a specific role in the ability to sail of a sailboat. Their "foil" function comes into play from a reach to when sailing upwind, avoiding excessive leeway. They avoid it primarily by simple lateral resistance but also generating lift to windward.

We have seen so far that the sails are nothing but the great wings of our floating airplane. They exploit the kinetic energy of the wind with the difference that a boat does not have an engine to generate apparent wind. Sailing upwind, sails transform a large part of the wind pressure into heel. Only a small part is transformed into propulsive force that makes the boat advance thanks to their wing shape trimmed to reduce heel and increase speed.

Old sails, for example, lose their "airplane wing" shape. They resemble C shapes or worse they have a claw near the trailing edge. When this happens, the wind hitting produces a heeling force force and any propulsion force is greatly diminished. Keel and rudder, on the other hand, counteract leeway when sailing upwind upwind according to the principles we talked about before, i.e. lateral resistance and lift.

Heeling: hull shape, ballast and stacking

It becomes clear that a sailboat is subject to different forces, some of which are useful to go faster, others that are not useful to generate any forward movement, instead they only waste energy in generating heel and leeway. The contrast to leeway exerted by the keel and rudder also introduces friction that reduce the "useful" forward forces. The evolution of racing boats, in order to avoid heel, has been driven towards the search stability of form or shape of the hull, i.e. hull shapes that resist to being heeled. The result has been wider and flatter hulls, and if we leave the world of monohulls, obviously catamarans and trimarans.

In an attempt to maximise the righting force, when the keels were still fixed, ballasts were introduced. Ballasts are tanks placed inside the hull and in the most lateral position possible with respect to the centreline, filled by hand or with a pump with sea water. Their role is to act as a counterweight, exactly the same as the crew sitting on the gunwale. The disadvantage of the ballast is that while making the boat more powerful, it weighs it down and therefore increases the resistance to movement.

In the classes where it is admitted, such as Mini 650, Class40 and IMOCA, the movable weights on board are used to generate righting force. That is, any bag containing water, food, clothing and other materials, as well as sails, everything, is moved to windward with the same effect of having someone sit on the gunwale and without the disadvantage of having to carry any additional weight.

A more advanced solution was possible, but it took time before we saw the first canting keels.

The canting keels and the first sailboats with vertical foils (daggerboards)

If we talk about keels, at first lead was inserted into the construction of the keel which constituted the bottom of the hull. Then keels then became separate elements from the hull, built for example in cast iron with the shape of an airplane tail wing. To increase the righting force and allow to increase the amount of sail (and therefore of "useful" force), the keels lengthened and the weight was moved to the bottom.

The fin is an empty box or a full blade shaped with fiberglass, which supports a lead bulb where the weight is concentrated. The advantage of this solution is the lowering of the centre of gravity of the keel and the consequent increase in the force that right the boat.

The modern solution is that of allowing the keel to tilt, so that in cross and upwind it can be canted to windward. By doing so, the righting force of the bulb weight increases considerably. However, this poses a problem: at the foil section is more and more horizontal it loses its function to counteract leeway. For this reason, looking at old IMOCA or Mini 650s we saw the introduction of "daggerboards". These were addtional "weightless" fins inserted like swords in the hull, either a single central one or more efficiently one on each side, slightly inclined, to take on the role of the blade of the keel that is lost once it is canted to windward in counteracting leeway.

Read the full article here...

Related Articles

Global Solo Challenge: Battery & power management
Almost every sailing or motor yacht has on board a more or less complex electrical system Almost every sailing or motor boat has on board a more or less complex electrical system and a variable number of batteries. This depends on the size of the boat, the instruments installed and the equipment on board. Posted on 29 Sep
Global Solo Challenge: Facing Cape Horn in a storm
A story of rounding the famous landmark After the second storm, the wind dropped rapidly, and within half a day it went aft and we could even hoist the big gennaker. Hugo and I celebrate, laugh, joke. Posted on 27 Sep
Global Solo Challenge: Pasquale, gentleman sailor
Pasquale De Gregorio embodies a dream, that of racing the most extreme solo race Pasquale De Gregorio is one of the closest sailors to all lovers of the sea and sailing. Pasquale is an example, he had to conquer the sea, he was not born near it, it was love at first sight, which lasted a lifetime. Posted on 25 Sep
Sail changes on an offshore racing boat
Sail crossover is a term used to refer to a boat's combination of sails for all conditions Sail crossover is a term used to refer to a boat's combination of sails for all conditions. Each sail has a range of use, beyond which a smaller sail will replace it. Posted on 18 Sep
Jean-Luc Van Den Heede interview
An in-depth analysis of solo sailing and of the problems to be faced such as food and sleep A long interview with Jean-Luc Van Den Heede, the last seadog, the man of records and the "long route" who talks to us about the mother of all non-stop solo circumnavigations. Posted on 13 Sep
32nd entry for the Global Solo Challenge
The momentum of the event continues to grow The momentum of the Global Solo Challenge (GSC) continues to grow. Organisers are delighted to announce that the 32nd entry is also the 3rd Australian skipper, with a 50+ foot performance boat, who at this stage wishes to remain anonymous. Posted on 6 Sep
Global Solo Challenge: Radar on sailboats
Making the most of it and using it safely The word radar is an acronym coined by the US Navy at the beginning of World War II with the meaning of "Radio Detection And Ranging". Its application for military purposes has spread over time, also finding diffusion in the civil field in aviation. Posted on 28 Aug
How to optimise route based on weather predictions
Optimising the route: understanding the problem to be solved. One recurring question among the novice offshore sailor is how to optimise your route when sailing. The practice is known among sailors with the French name of Routage or the English name of Weather routing. Posted on 23 Aug
Solving problems with inboard diesel engines
Some of the more common issues seen with sailboat engines To fully understand the operation of the inboard engine of a sailboat, you need to study at least the basic principles. Refer to the many resources available online, a short google search will bring up many results. Posted on 21 Aug
How to make the most of wind maps and grib files
Understanding the limitations, from the Global Solo Challenge Wind maps derived from grib files are nothing more than one of the possible representations of the development of the meteorological situation. Posted on 18 Aug