Please select your home edition
Edition
Sea Sure 2021 - RED - LEADERBOARD

Drop Nose Pins - What are they and why use them?

by Daniel Henderson, Sea Sure 14 Apr 15:43 BST
Sea Sure Drop Nose Pins © Sea Sure

A drop nose pin is a pin that can be used for securing or attaching components. They can be used in a number of places around a boat such as on a bow roller, chain plates, vang arms, mast foots, the list goes on, but why would you use a drop nose pin instead on a clevis pin or bolt?

If you own a boat or have ever sailed on a boat and someone has asked you to remove a clevis pin, it can be difficult at the best of times, let alone when you have cold hands. And then when you finally manage to get the ring off to remove the clevis pin, you drop the ring and watch as it drops on deck or over the side. The same goes for a bolt but even worse, you need tools to be able to remove it.

A drop nose pin has an end section which we call the "nose" that can be turned from horizontal to vertical so that it can be quickly inserted and then secured by turning the nose back to horizontal. There are no small rings or nuts that can be dropped over the side and if you wanted to be really safe you can attach a lanyard to the head of the drop nose pin so that the whole pin is kept safely on the boat.

Why a Sea Sure Drop Nose Pin?

There are a number of different drop nose pins on the market, and although they may look very similar, there are some key differences that are worth looking into before you make your purchase.

The first thing to check is the material. All of our drop nose pins are manufactured from 316 stainless steel. We use 316 as this is one of the best variations of steel to be used in a marine environment. You may find other drop nose pins that are manufactured from either "stainless steel" or "304" stainless steel. If a grade of stainless isn't mentioned or if it states 304 then these will show signs of rust much faster than 316 does and leave horrible orangey brown stains on your pride of joy. You may also find that an inferior grade of stainless steel will start to loose its integrity and load capacity as it rusts and corrodes.

The second thing to check is the nose mechanism. Although our drop nose pins look simple enough on the outside there is something going on within our pins that is crucial to its securing ability. Our drop nose pins have a bore drilled down the middle that houses a 316 stainless steel ball and spring. This spring and ball mechanism locks the head of the pin in place. The nose has 2 small half round grooves that the ball sits within so that it locks the head securely whether it is in the open or closed position. Some of the other drop nosed pins on the market don't have this mechanism which means that they can fall out or work their way loose.

The above 2 factors do have an impact on the price of the product. A Sea Sure drop nose pin with life time warranty that is made from 316 stainless steel and has a locking mechanism is anywhere between £10-20 depending on size. A 304 Steel drop nose pin with no warranty and without a locking mechanism is anywhere from £5-10. Do you want to save £5 on something that could lead to a very bad day on the water? When your next buying fixings or hardware for your boat do your research, ask the chandleries or manufacturers about the materials, function and load capabilities so that you don't let £5 ruin your days sailing.

To see the full range please visit www.sea-sure.co.uk/drop-nose-pins-4-c.asp

Related Articles

It's Friday again... but not any Friday
Up to 15% off across all Sea Sure affiliated brands Up to 15% off across all Sea Sure affiliated brands for Black Friday 2021. This covers Blacks & Taylors, WBV Shock Mitigation Solutions, and Sea Sure too. Posted on 26 Nov
METSTRADE 2021: SHOCK-WBV and Omega
We speak to Daniel Henderson and see a slow-motion demonstration of Omega in action! Mark Jardine chats to Sea Sure's Daniel Henderson about the SHOCK-WBV and Omega shock mitigation units, with a slow-motion demonstration of Omega. Posted on 18 Nov
IBEX debut for Shock-WBV, P Series
Quick and easy to install Shock Mitigation Units Lightweight, compact P Series units bolt directly to a standard pedestal and leisure chair to make new or retrofit installations quick and easy. The bolt pattern has slots and will fit almost any chair. Posted on 23 Sep
SHOCK-WBV takes 1st & 2nd
At the BPRC Cowes Poole Cowes Offshore Power boat race World renowned powerboat designer Adam Younger and crew Amy Rickards took 1st place in the 93.70nm offshore powerboat race from Cowes to Poole and back. Adams new Northstar RIB's UK powerboat features 2 SHOCK-WBV C series suspension mechanisms. Posted on 6 Sep
How Sea Sure came to make the Firefly rudder stock
The team racing flights of Fireflys get put through a lot! For those of you that have tried your hand at Team Racing, you will know that those poor flights of Fireflys get put through a lot! Posted on 26 Jul
Hurco CNC machine raises productivity at Sea Sure
Investment in new machining centre to keep up with demand for SHOCK-WBV products Graham Brown, managing director of Sea Sure Ltd, a boat fittings and accessories design, development and manufacturing specialist in Warsash, Southampton, bought his wife Judith a Merry Fisher powerboat nearly 10 years ago. Posted on 20 Jul
Ultimate Marine & HCB use SHOCK-WBV P series units
Sea Sure's seating aboard possibly one of the hottest powerboats of the year Possibly one of the hottest powerboats of the year to come out of Ultimate Marine & HCB in the USA is using SHOCK-WBV P series units for its seating. Posted on 13 May
Sea Sure Dinghy Show Weekend Offers
15% off across the whole site until 5pm on the 1st March We are running 15% off across the whole site (www.sea-sure.co.uk) until 5pm on the 1st March when you use the discount code "DINGHYSHOW21" at checkout. Posted on 26 Feb
America's Cup highlights need for shock mitigation
Sea Sure developed its Shock-WBV for wind-over-tide, fast, harsh wave patterns The America's Cup has highlighted the increasing need for shock mitigation suspension seating as spectator and support boats struggle to keep up with the amazing speeds these new machines get up to out on the water. Posted on 12 Feb