Please select your home edition
Edition
Upffront 2020 Foredeck Club LEADERBOARD

Composite Rigging - what are the benefits?

by Phil Anniss 22 Oct 17:00 BST
Composite rigging benefits © Future Fibres

Upffront.com is constantly striving for lighter, faster and safer sailing for all boat owners, regardless of sailing style. Composite (or synthetic) rigging is one of the biggest and most cost-effective performance improvements that you can make. In this article we look at the benefits of switching from wire or rod to composite standing rigging.

Weight

The exact numbers will vary depending on fibre and system choices but, as a general rule, a retrofit from wire / rod rigging to composite will create an approx. 75% weight saving. For example, the rod weight alone (excl. fittings) on an X362 would be approx. 23kg (V's/D's, forestay and backstay) whereas the equivalent PBO cable weight (also excl. fittings) would be approx. 6kg. That is a 17kg saving.

On average, every kilogram saved from your mast and rigging package, equates to adding 4kg to the keel, which has extensive benefits to your sailing performance.

Benefits of reducing weight aloft:

  • Increased righting moment / stability means you sail faster
  • Lower Centre of Gravity = better handling and responsiveness
  • Faster acceleration out of tacks
  • Less pitching moment = faster upwind in a choppy sea
  • Lower heel angle and reduced rolling at anchor = greater comfort
  • Reduced fuel consumption under motor!

Strength

Composite standing rigging is specified on a "stretch equivalent" basis. That means that if you are replacing a Nitronic rod rigging element, the composite cable will be designed to be the same stiffness / stretch as your existing rod. This is done to ensure that your mast is properly supported and performs as it was originally designed.

A beneficial by-product is that, depending on the fibre, the overall break strength of the composite cable will be 50-60% stronger than the rod equivalent. As the working loads are the same, it means that you have a much higher factor of safety with composite rigging.

Composite rigging is therefore significantly lighter and inherently safer than rod / wire standing rigging - so what's the catch!?

Cost

The obvious downside of changing to composite rigging is that it does cost more than rod / wire. In a recent example on a cruiser/racing 40-footer, the composite rigging retrofit project (including cables, new metalwork and necessary spreader modifications) was between 2x and 3x the replacement rod cost (depending on composite manufacturer quote). So, this performance upgrade is not in everyone's budget, but if you are looking to breath a new lease of life into a beloved boat, switching to composite rigging has been shown to be THE most cost-effective performance improvement.

The fibre rigging mindset

There is a general perception that you can put a set of wire shrouds on your boat and forget about them. Whilst this is misguided, with proper care and maintenance metal shrouds are generally very resilient. You would probably be more worried about your spinnaker pole in a collision against the forestay, and a sail / batten pocket will come off worse if the main is pressed against the shrouds for long periods downwind!

Regardless of core material you cannot dispute the fact that a hard edge (metal or even sailcloth) can chafe through both cover and core of a carbon / fibre cable. Therefore, you do need to avoid full battens resting against the shrouds and you should not let sheets/halyards run across your composite Verticals. However, one of the primary roles of braided covers on composite rigging is to act as an early warning that chafe is a potential issue. On some offshore race boats, they have two braided covers - the outer one black, with an inner white cover - to aid visual inspection and deal with potential problems early.

So, with a proactive approach to managing your rigging, and with regular inspection, all the potential threats can be avoided and composite rigging can ultimately last as long, if not longer than rod/wire.

Conclusion

A retrofit to composite rigging is one of the biggest single performance improvements you can make to your sailing boat. It takes a different mindset and some upfront investment, but the effects can be transformational on an old boat. This is not just for racing orientated sailors. Reducing weight aloft can simply make coastal cruising more enjoyable and safer:

Light + Safe = Fast + Fun!

If you would like to explore the options for a retrofit to composite rigging please use the Composite Rigging Enquiry Form or contact us at

Related Articles

Continuous versus Discontinuous Standing Rigging
Looking at the differences, and pros/cons of both types Regardless of material choice (wire, rod or composite), there are two main types of lateral rigging configurations, referred to as Discontinuous or Continuous rigging. Posted today at 5:00 pm
Celebrating curves with the LOOP Flexi Stick-on
These padeyes can stick to a curved surface, and take a lot of weight You would probably agree that there are very few flat surfaces on a sailing yacht, whereas most hardware bases are flat. Using modern materials and construction methods, the innovative LOOP Flexi Stick-on padeye offers some interesting possibilities. Posted on 19 Nov
Straight Talking
Mast and standing rigging terminology from upffront.com Upffront.com is all about performance sailing hardware and rigging systems. The heart, and driving force, of any sailing yacht is its mast and standing rigging which support the sails. In this article we outline the key terminology. Posted on 12 Nov
Composite Standing Rigging
Material options discussed by upffront.com Having established the significant advantages of reducing rigging weight, next we would like to look at the composite rigging options available on the market. However, before we get to that point, we need to take a little diversion. Posted on 5 Nov
Sailing Autopilot Components
Understanding the necessary aspects of a good system For most cruising and offshore race sailboats, the autopilot is a critical piece of equipment. However, the difference between a "good" and a "not so good" sailing autopilot can be dramatic! Posted on 30 Oct
Torsional Ropes Versus Cables
Noting the all-important point at which you should change between them In this blog we explore the differences between Torsional Ropes and Custom Torsional Cables, the pros and cons of each and provide guidance on the specification boundaries between the two. Posted on 16 Oct
Adding a Staysail?
Inner forestay setup options discussed by upffront.com Are you considering upgrading your sail plan to include a staysail? It is an increasingly popular choice, offering considerable performance benefits. In this article we focus on the various setup options. Posted on 8 Oct
Improve Your Sailing Performance
Three simple, cost-effective upgrades from upffront.com Reducing weight should be every sailors goal, no matter what their sailing style. One kilogram removed from the mast and rigging package is equivalent to adding 4kg to the keel. So, reducing weight aloft increases your stability. Posted on 1 Oct
Stripping and recovering yacht ropes
Upffront.com look at when, where and why The majority of yacht ropes are double braid construction i.e. with a core and braided cover. The purpose of this cover is to protect the core from general chafe, abrasion and UV damage but also to provide grip. Posted on 23 Sep