Please select your home edition
Wessex Resins 2019 - Pro-Set - 728x90

West System 104 Junior Pack used to create bullet coat racks

by Zella Compton 13 May 12:00 BST
West System 104 Junior Pack used to create bullet coat racks © David Caldwell

Dee (David) Caldwell has spent his lockdown creating bullet coat racks. Using locally sourced WW2 bullets he's collected at Medmerry, West Sussex, and wood from a cedar planted by Capability Brown in 1750, he's started a new business in his garden workshop.

Dee's enterprise began six weeks ago when his wife Penny suggested he use all the bullets he'd previously collected, and his wood pile, to make coat racks. Dee also took her advice as to the best tool for the job: epoxy (she is a ceramicist and uses epoxy to repair fine vases).

Dee invested in a West System 104 Junior Pack which is ideal for small projects and contains a 600g pack of West System 105 Epoxy Resin and 205 Fast Hardener.

The process is straightforward. Dee washes the bullets with cold water before hammering them to get rid of the debris like mud, and clay. He sands them down to the original bullet and dips them into the mixed West System epoxy, waiting for one end to cure before he repeats the process at the other end of the bullet.

"I use epoxy," Dee says, "to get the best protection and the smoothest finish. The odd bullet has a hole in it, I fill those with West System epoxy as well."

He attaches the bullets to the cedar planks - West System epoxy is incredibly strong - and treats the wood with four coats of oil to bring out the fine grain before applying brackets to support the coat racks on the wall. No two racks are the same given the individual nature of the wood and the bullets' unique properties.

Dee collected the bullets from Medmerry, they are remnants of a 1940s bombing range. Aircraft flew inland and fired live rounds of bullets into the range. The area was recently 'realigned' to create a salt marsh on the south coast, so Dee estimates his supply will only last for a couple more years before the beach is fully underwater.

Dee had worked with epoxy previously; he repaired surfboards in the 1980s. But, he says: "West System epoxy is straightforward to work with. Timing is key, so make sure you follow the instructions carefully. It gives great results."

Aside from making beautiful coat racks which David is selling from £75+ (contact him via Chichester_wood on Instagram or chichesterwood on ETSY), Dee is also General Manager of Solite, the custom fit water-shoe manufacturer used by professional surfers and sailors across the world.

"We're constantly amazed by the ingenuity of our customers," says Ian Oliver, MD Wessex Resins and Adhesives (the company which manufactures West System epoxy in the UK, under licence from Gougeon Brothers Inc). "West System epoxy has been developed and refined for fifty years, but we doubt anyone would have imagined it'd be used for bullet coat racks. It just goes to show its versatility and strength. If anyone is considering using epoxy for the first time, we have lots of guidance and advice on our websites, and - plus people are welcome to contact our technical team."

West System Epoxy can be cured over a wide temperature range to form a high-strength solid with excellent moisture resistance - it is designed specifically to wet out and bond with a wide variety of materials. It is formulated without volatile solvents and has minimal shrinkage after curing. Moreover, it has a relatively high flash point and no strong solvent odour.

West System 104 Junior Pack has a RRP of £22.99, and can be purchased from all good chandleries as well as online retailers. Details of stockists are on

Related Articles

Stunning colour tints for epoxy creations released
An exciting line of liquid colours has been released to add bold and beautiful tints to epoxy Specifically designed for epoxy river tables, jewellery and other crafts as well as sporting equipment like surf, skate and snowboards, the beautiful selection of colours come in two thematic packs, Soft and Vivid. Posted on 1 Aug
DNV GL approval for Pro-Set epoxies
Lloyd's Register approval for WS resin and hardener combination PRO-SET epoxy systems have been approved by DNV GL for use on ships, yachts and as 'laminating resin for construction of laminates made of fibre reinforced plastics'. Posted on 14 Jul
Building a wooden dinghy with epoxy resin part 3
Completing the hull and making an amazing spinnaker chute Steve Goodchild wanted to avoid nailing the planks to offset chocks set against the frames, as this would leave multiple rows of nail holes visible in the wood. Instead, he decided to glue the entire hull together using thickened epoxy. Posted on 11 Jun
Chandleries currently open stocking epoxy resin
Places to buy West System products during June 2020 in the UK We're all eagerly anticipating the reopening of retail outlets. In the meantime, if you're looking to stock up on your favourite epoxy brands, here are some WEST SYSTEM®, PRO-SET® and Entropy Resins® epoxy stockists who we know are currently open. Posted on 5 Jun
WEST SYSTEM® epoxy set to go sub-orbital
NOVA 2 rocket within ten months of its first launch A NOVA 2 rocket being developed by Starchaser is within ten months of its first launch. This one-seater rocket is a significant step towards future plans which include a rocket capable of taking two passengers with the pilot. Posted on 1 Jun
Electric boat's sustainable construction
Bio-based infused epoxy resin, recycled PET, and basalt/flax fibres RS Electric Boats, the sister company to RS Sailing, unveiled its electric RIB earlier this year, a boat that's said to be the highest level of sustainable construction of any boat in its sector. Posted on 2 May
WEST SYSTEM 105-K Glass Fibre Boat Repair Kit
The upgraded kit comprises everything needed to fix minor cracks, holes and punctures Wessex Resins is delighted to announce it has improved and updated the WEST SYSTEM® 105-K Glass Fibre Boat Repair Kit. The kit comprises everything needed to fix minor cracks, holes and punctures as well as refit and replace hardware on a boat. Posted on 16 Apr
Wessex Resins & Adhesives joins 1% for the Planet
Donating to Protect Our Winters UK Wessex Resins and Adhesives is delighted to announce it has donated 1 per cent of its annual turnover for the ENTROPY RESINS® product range to Protect Our Winters UK. Posted on 9 Apr
Building a wooden dinghy with epoxy resin part 2
Strip planking the hull, and making an amazing wooden mast "You don't build your own boat to save money," Steve explains. "You do it for the sheer satisfaction of the craftsmanship involved. For what I paid in raw materials I could have bought several second-hand boats, but where is the fun in that?" Posted on 18 Mar