Rossiter Pintail Mortagne sur Gironde, near Bordeaux |
![]() |
Laser 28 - Excellent example of this great design Hamble le rice |
![]() |
List classes of boat for sale |
RS600 Help |
Post Reply ![]() |
Page <12 |
Author | |
Guests ![]() Guest Group ![]() |
![]() ![]() ![]() ![]() Posted: 25 May 06 at 3:44pm |
For a 600, thats some EXTREME rig tension!! When i first got mine i talked to some of the old skool 600 guys and their general rule of thumb seemed to be "floppy is fast", the idea being you should set it to you weight so that as you put your weight on the wire the windward shroud should just go floppy. On a loose gauge i doubt im evening hitting 20 (im quite light ya see). hhmmmmm i think i may try some extreme tension and see what it feels like, could well be that ive been sailing with a horrible shaped rig! Any chance of you going to the 600 open at weymouth 1st wknd of june?? would be nice to race against some other Y&Y forum members! Doug Edited by Doug.H |
|
![]() |
|
29er397 ![]() Really should get out more ![]() ![]() Joined: 02 Feb 06 Location: United Kingdom Online Status: Offline Posts: 505 |
![]() ![]() ![]() ![]() |
bov did my tillers, same tube as the rooster ones which is almost indistructable! only cheaper from bov. only complain i have is the crappy UJ's but the are on the 29er, not bovs fault.
|
|
![]() |
|
Matt Jackson ![]() Really should get out more ![]() ![]() Joined: 21 Sep 04 Location: Darlington Online Status: Offline Posts: 962 |
![]() ![]() ![]() ![]() |
I recently got a 2m Harrison extension from P&B for £75. It's the business and has taken a lot more abuse then the crap Holt one (I think they only get crap over a certain length - mine was 2.1m) I broke last season. Incidentaly I made a Streaker and Oppy sailor quite happy when I presented each of them with a 'new' carbon tiller extension. I guess if you're lucky with where it broke you could sell both ends and recoup some of the replacement cost? Edited by Matt Jackson |
|
Laser 203001, Harrier (H+) 36
|
|
![]() |
|
Isis ![]() Really should get out more ![]() ![]() Joined: 01 Sep 05 Online Status: Offline Posts: 2753 |
![]() ![]() ![]() ![]() |
Im saying nothing.
|
|
![]() |
|
rich96 ![]() Really should get out more ![]() Joined: 20 Jan 05 Online Status: Offline Posts: 596 |
![]() ![]() ![]() ![]() |
Hi The mast will be raked until you tighten the forestay.It also doesnt sit neatly on thre step. It should not be hugely raked once you've got lots of forestay tension on - nothing like a Contender. Go onto the RS Web site and look at the Tuning section for the 600 - lots of useful docs to print off. - http://www.rs-association.com/
Good luck
|
|
![]() |
|
Shaggy ![]() Newbie ![]() Joined: 21 May 06 Location: United Kingdom Online Status: Offline Posts: 2 |
![]() ![]() ![]() ![]() |
Hi people, i have just purchased a rs600. just a question on the rig setup. there seems to be alot of rake on the mast before the sail is even on, it doesnt sit flush on the mouting on the deck. could this be down to the shrouds being to short or are they all like this? if anyone has any pictures side on showing there mast and step would be much appreciated. |
|
RS600 (662)
|
|
![]() |
Post Reply ![]() |
Page <12 |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |