Laser 28 - Excellent example of this great design Hamble le rice |
![]() |
Rossiter Pintail Mortagne sur Gironde, near Bordeaux |
![]() |
List classes of boat for sale |
Harness Haze |
Post Reply ![]() |
Page <1 23456 8> |
Author | |
Buzz ![]() Posting king ![]() Joined: 14 Jun 04 Online Status: Offline Posts: 101 |
![]() ![]() ![]() ![]() Posted: 05 Apr 05 at 1:33pm |
Scooby_simon mentions carrying bolt cutters. Bolt cutters don't do a very good job of cutting wire rope because of their action - the cutting edges butt one another. Wire cutters use a different action where the cutting edges cross one another (like pruning shears) and are much more effective. Wire cutters for cutting up to 4mm wire are quite small at about six inches high and can easily be stored on a rescue boat
|
|
![]() |
|
hurricane ![]() Really should get out more ![]() ![]() Joined: 15 Mar 04 Location: United Kingdom Online Status: Offline Posts: 1047 |
![]() ![]() ![]() ![]() |
all our safety boats carry wire cutters and are tested often!! all clubs should have them and maintain them!
|
|
lifes to short to sail slow boats!
RIP Olympic Tornado 1976-2007 |
|
![]() |
|
Contender443 ![]() Really should get out more ![]() ![]() Joined: 01 Oct 04 Location: United Kingdom Online Status: Offline Posts: 1211 |
![]() ![]() ![]() ![]() |
You need to know what to do with wire cutters though. If you cut away a rig on an inverted boat then it could be punched through the hull and cause the whole lot to sink. You would also cause more loose itemns in the water to get trapped round the person in the water or round a safety boat propellor. What if the rig sinks then taking the trapped person to the bottom with it. Best thing I think is to try and right the boat ASAP. |
|
Bonnie Lass Contender 1764
|
|
![]() |
|
Buzz ![]() Posting king ![]() Joined: 14 Jun 04 Online Status: Offline Posts: 101 |
![]() ![]() ![]() ![]() |
Usually cutting the rig away is when you have run out of other options. We had to cut a rig out of an RS800 last season. The crew were very cold and tired having been in the water for over twenty minutes. We had three rescue boats in attendance all with motors off. We got the boat on its side and agreed how we were going to remove the rig. When we came to actually cut the rig we put the crew in one of the rescue boats. After the rig was all sorted out we put the crew back in their boat and towed it in while the other brought the remains of the rig.
|
|
![]() |
|
49erGBR735HSC ![]() Really should get out more ![]() ![]() Joined: 30 Mar 05 Location: United Kingdom Online Status: Offline Posts: 1991 |
![]() ![]() ![]() ![]() |
GUL have a new bouancy aid out which seems really stream line and
doesn't look like it's got to much foam in it. Saw one at the weekend
and could hardly beleive how thin it was. Could be better for swimming.
|
|
![]() |
|
carshalton fc ![]() Really should get out more ![]() ![]() Joined: 26 Jan 05 Location: England Online Status: Offline Posts: 2337 |
![]() ![]() ![]() ![]() |
yer that would be good if you were going to do lots of swimming!!
![]() |
|
International 14 1503
|
|
![]() |
|
Wave Rider ![]() Really should get out more ![]() Joined: 27 Oct 04 Location: United Kingdom Online Status: Offline Posts: 909 |
![]() ![]() ![]() ![]() |
Yeah when i did my canoeing stuff we got told to cpasise the boat with a spray deck on and then rigt it from a capsise, then we had to learn how to right the boat without getting out of it......then you stay dry with the spray deck on
![]() |
|
-[Franko]-
Chew Valley Lake Sailing Club RS600 933 |
|
![]() |
|
carshalton fc ![]() Really should get out more ![]() ![]() Joined: 26 Jan 05 Location: England Online Status: Offline Posts: 2337 |
![]() ![]() ![]() ![]() |
yer i hate capsizing in a canoe it is probily more dangerous than a siling capsize and if anything the canoes need quick release stuff!!
![]() |
|
International 14 1503
|
|
![]() |
|
49erGBR735HSC ![]() Really should get out more ![]() ![]() Joined: 30 Mar 05 Location: United Kingdom Online Status: Offline Posts: 1991 |
![]() ![]() ![]() ![]() |
Does anyone know if the Bethwaite harness is legal next year because
technically it doesn't have a quick release system because it doesn't
need one, and doesn't the rule say ALL harnesses must have a quick
release device. If it's legal, it may be the route we'll take on our
boat. Alternatively, the new Magic Marine spreader bars look sorted, no
plasticy stuff or fiddly bits. Might get them if they are as good as
they look in the magazines.
Edited by 49erGBR735HSC |
|
![]() |
|
Spot192 ![]() Really should get out more ![]() ![]() Joined: 28 Nov 04 Location: Germany Online Status: Offline Posts: 833 |
![]() ![]() ![]() ![]() |
i bought one of those bethwait harnesses. i really hated it! the system
isnīt very good and not even bethwaite sails with this harness!
|
|
![]() |
Post Reply ![]() |
Page <1 23456 8> |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |