Rossiter Pintail Mortagne sur Gironde, near Bordeaux |
![]() |
Laser 140101 Tynemouth |
![]() |
Laser 28 - Excellent example of this great design Hamble le rice |
![]() |
List classes of boat for sale |
Rope Self Tackers |
Post Reply ![]() |
Page 12> |
Author | |
Isis ![]() Really should get out more ![]() ![]() Joined: 01 Sep 05 Online Status: Offline Posts: 2753 |
![]() ![]() ![]() ![]() Posted: 01 Sep 07 at 7:10pm |
If the track is underbent (ie closer to straight) the car will be pulled towards the centre when you yank on the sheet tension.
If the track is overbent the sheet may have to be eased for tacks as sheet tension will pull the car towards the outside of the track. Idealy I think the track is supposed to the slightly underbent... but straight is definantly a bad idea |
|
![]() |
|
MpHarris ![]() Posting king ![]() ![]() Joined: 09 Jun 07 Location: United Kingdom Online Status: Offline Posts: 141 |
![]() ![]() ![]() ![]() |
I've seen boats with both curved tracks (keepin the jib under tension throughout) and some with apparent straight ones, do they all work as good as each other and if not what are the benefits or problems with the different setups?
|
|
Cherub 2663 "Sweet Dreams"
RS400 451 "IceBerg" |
|
![]() |
|
I luv Wight ![]() Really should get out more ![]() ![]() Joined: 28 Jan 05 Location: United Kingdom Online Status: Offline Posts: 628 |
![]() ![]() ![]() ![]() |
Ronstan sell curved 49er and 29er tracks/cars.
Atum Bom ( which is the current 2 x uk nat champ cherub) has a 49er track. Sometimes ronstan have undrilled track in stock that you can get rolled to the bend. |
|
![]() |
|
JimC ![]() Really should get out more ![]() ![]() Joined: 17 May 04 Location: United Kingdom Online Status: Offline Posts: 6662 |
![]() ![]() ![]() ![]() |
You'll need to get a skilled metal basher to bend you one. You should get undrilled track - getting track with predrilled holes in bent will rarely give good results.
|
|
![]() |
|
chrisg ![]() Really should get out more ![]() ![]() Joined: 23 Mar 07 Location: United Kingdom Online Status: Offline Posts: 893 |
![]() ![]() ![]() ![]() |
who makes/sells w tracks?
|
|
![]() |
|
JimC ![]() Really should get out more ![]() ![]() Joined: 17 May 04 Location: United Kingdom Online Status: Offline Posts: 6662 |
![]() ![]() ![]() ![]() |
A W track is one where there is a reverse curve in the centre rather than being a continuous radius. The sheet gos slack as it goes past the reverse curve. It enables the track to be a bit further aft.
|
|
![]() |
|
m_liddell ![]() Really should get out more ![]() Joined: 27 May 05 Location: United Kingdom Online Status: Offline Posts: 583 |
![]() ![]() ![]() ![]() |
What is a W track?
|
|
![]() |
|
NickA ![]() Really should get out more ![]() Joined: 30 Mar 05 Location: United Kingdom Online Status: Offline Posts: 784 |
![]() ![]() ![]() ![]() |
One of the 3000 class has been experimenting with self tackers to go with the big and roachy, overlapping North jibs. A W track was tried but the sail didn't reliably cross the boat. The continuous curve Mk2 track is reportedly much better. The too-far-forward jib cleat that results from the continuous curve is compensated by use of a clew board on the jib. Ie it's sheeted from slightly in front of the clew with the board providing tension in the roach. I have yet to see it in use mind .
|
|
Javelin 558
Contender 2574 |
|
![]() |
|
BBSCFaithfull ![]() Really should get out more ![]() ![]() Joined: 06 Dec 05 Location: United Kingdom Online Status: Offline Posts: 1251 |
![]() ![]() ![]() ![]() |
Right will get a w track i feel. jus the thought of putting holes in my deck wasnt appealing.
Cheers, Alex |
|
Greatfully Sponsored By
www.allgoodfun.com Int 14 GBR 1503!! |
|
![]() |
|
Smight at BBSC ![]() Really should get out more ![]() ![]() Joined: 09 Jan 07 Location: Great Britain Online Status: Offline Posts: 1129 |
![]() ![]() ![]() ![]() |
Told you alex but would you listen ... er no |
|
RS600 988
|
|
![]() |
Post Reply ![]() |
Page 12> |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |