Rs200 slot gasket emergency repair |
Post Reply ![]() |
Author | |
ifoxwell ![]() Really should get out more ![]() ![]() Joined: 05 Jan 06 Location: Hoo Online Status: Offline Posts: 669 |
![]() ![]() ![]() ![]() Posted: 16 Jun 21 at 11:48am |
Hoping to do the Medway Marathon this weekend but realised last night that the slot gasket has half fallen off. 3ft detached from the front
Given that I'll only have at most 2 hours before launching do I Try and stick it back on if so with what Temporarily stick it back with parcel tape or simular Rip it off and sail without it Or something else Ideas please |
|
RS300
|
|
![]() |
|
JimC ![]() Really should get out more ![]() ![]() Joined: 17 May 04 Location: United Kingdom Online Status: Offline Posts: 6660 |
![]() ![]() ![]() ![]() |
impact adhesive would be my choice.
|
|
![]() |
|
iGRF ![]() Really should get out more ![]() ![]() Joined: 07 Mar 11 Location: Hythe Online Status: Offline Posts: 6499 |
![]() ![]() ![]() ![]() |
I'm running an emergency repair on the Solution, glued with that no nails stuff and backed up with good old *Duck Tape went from last back to first last time we ventured out...
But get the kit RS sell, their glue (at least the stuff they supplied to us with the RS500) is the nuts, best kit I've come across. *Duck Tape it's a brand name sold at one of the online chandlers, beware, the last one I bought had just a few yards on it. Edited by iGRF - 16 Jun 21 at 5:11pm |
|
![]() |
|
GybeFunny ![]() Far too distracted from work ![]() Joined: 27 Oct 09 Online Status: Offline Posts: 403 |
![]() ![]() ![]() ![]() |
Rooster have a new tape they are recommending for this, there was a video of Steve applying it and it looked very easy. I expect you will want a new slot gasket which may not be delivered in time though.
If you cannot get the right stuff I wouldnt consider sailing without, the boat will be like a fountain! Sticking on with duct tape will be better than nothing.
|
|
![]() |
|
Sam.Spoons ![]() Really should get out more ![]() Joined: 07 Mar 12 Location: Manchester UK Online Status: Offline Posts: 3400 |
![]() ![]() ![]() ![]() |
The Rooster/3M tape is certainly easy to use and seems to stick very well, my mate replaced his Blaze slot gasket a couple of weeks ago and it was very straightforward and simple.
|
|
Spice 346 "Flat Broke"
Blaze 671 "supersonic soap dish" |
|
![]() |
|
ifoxwell ![]() Really should get out more ![]() ![]() Joined: 05 Jan 06 Location: Hoo Online Status: Offline Posts: 669 |
![]() ![]() ![]() ![]() |
As an update for those that may find themselves in a similar position.
I scraped off all the old glue that I could in the time allowed with an old chisel and then stuck it back on with evostick impact adhesive. Toolstation sold the stuff and at least i knew I could get it before the race. The joint was only completed about 20 min from launch so I ran a line of the thin brown parcel tape around the outside to help hold it all in place, not ideal but I figured it was better than having the tape half fall off in the race. Any way end result is that its still on and worked fine, I now just have to remember to roll it over and take the tape off now. Thanks for the input everyone
|
|
RS300
|
|
![]() |
Post Reply ![]() |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |