New Posts New Posts RSS Feed: Laser Arms Race
  FAQ FAQ  Forum Search   Register Register  Login Login

Laser Arms Race
 Post Reply Post Reply Page  <1 8910
Author
  Share Topic Share Topic  Topic Search Topic Search  Topic Options Topic Options
turnturtle View Drop Down
Really should get out more
Really should get out more


Joined: 05 Dec 14
Online Status: Offline
Posts: 2538 		Post Options Post Options   Quote turnturtle Quote  Post ReplyReply Direct Link To This Post Topic: Laser Arms Race
    Posted: 05 Jun 18 at 1:45pm
LPE are simply creating a product that the after market appears to want....  given the willingness to accept replica sails at a lot of clubs, and given the usually b**locks that ensues as a result of it, it looks like LPE are simply providing a 'middle ground' option for those who are committed to the concept of what the laser is all about, without necessarily putting their hands as deep into their pocket as necessary.
Back to Top
RS400atC View Drop Down
Really should get out more
Really should get out more


Joined: 04 Dec 08
Online Status: Offline
Posts: 3011 		Post Options Post Options   Quote RS400atC Quote  Post ReplyReply Direct Link To This Post Posted: 05 Jun 18 at 2:53pm
Originally posted by bustinben

....

The bend characteristics of the composite top section are as good as identical to the aluminium one up to the point where it deforms.  Force required for a given amount of deflection is basically the same (according to my boat park/weight hanging measurements).  

You don't need to use more kicker to bend the mast the same amount, but what does change is that the force from the same "amount" of kicker decreases over time as the aluminium section takes on a permanent bend.  

Given that we've always been pulling the kicker on to the point where you can hardly get under the boom and the mainsheet blocks are scraping on the deck I don't think much is really going to change with the amount of kicker used.
I think it's not directly pulling on the kicker that permanently bends top sections.
It's having a lot of kicker on, then getting hit by a gust.
Something has to give, and in your case it's now the lower section.
The lower section is a chunky old thing, we shouldn't really be breaking those.
If we fix that then the boom starts to look weak.

This is the problem with piecemeal re-design or 'backwards compatibility at all costs'.
Designing a whole new rig from scratch would probably have allowed something far better.
But I suspect the main thing is, the people who break Laser masts on regular basis see it as an acceptable cost. The only good thing about the Laser is the number of them to race against. Every part of the boat is basically worse than virtually every me-too alternative.
Re-design the rig and you're still left with a compromised cockpit, self bailer that mostly sucks in the American sense, centreboat that flops about in the slot, rudder stock that corrodes, etc etc.
In 1969 it was a visionary design, but so was the Austin Maxi...

On a windy day, an old laser is still up there in the accessible fun stakes though.
Back to Top
turnturtle View Drop Down
Really should get out more
Really should get out more


Joined: 05 Dec 14
Online Status: Offline
Posts: 2538 		Post Options Post Options   Quote turnturtle Quote  Post ReplyReply Direct Link To This Post Posted: 05 Jun 18 at 3:00pm
Originally posted by RS400atC



On a windy day, an old laser is still up there in the accessible fun stakes though.

on a gutless one too - if there are others to race against... which there usually are, somewhere nearby anyway.

edit: great post btw!




Edited by turnturtle - 05 Jun 18 at 3:01pm
Back to Top
Chris 249 View Drop Down
Really should get out more
Really should get out more
Avatar

Joined: 10 May 04
Online Status: Offline
Posts: 2041 		Post Options Post Options   Quote Chris 249 Quote  Post ReplyReply Direct Link To This Post Posted: 05 Jun 18 at 8:59pm
Originally posted by bustinben

 
Ideally you'd sail the boat totally flat and with the rig set up so that weather helm is minimal.  Given that the rudder is so small anyway, if you made the blade more vertical you'd reduce the feedback coming through it even more which would make it harder for the sailor to feel when the boat isn't in balance.

So the boat might feel nicer when it's being sailed badly, but it would also be harder to sail it better because you'd lose feedback from the rudder.

I think with that in mind it would probably give the better sailors an advantage over the not so good ones, which would be the opposite to what's intended.

I think we'd get used to the reduced feedback very quickly, just as you do in Tasars, FDs, Int Canoes etc. I tend to think the Laser is a much better boat than many people think (just about every supposed disadvantage is also an advantage in other ways or to other people) but the rudder design was probably the result of the fact that the creators had grown up sailing older classes.
sailcraftblog.wordpress.com

The history and design of the racing dinghy.
Back to Top
bustinben View Drop Down
Far too distracted from work
Far too distracted from work


Joined: 15 Oct 06
Online Status: Offline
Posts: 288 		Post Options Post Options   Quote bustinben Quote  Post ReplyReply Direct Link To This Post Posted: 06 Jun 18 at 10:09am
Originally posted by turnturtle

LPE are simply creating a product that the after market appears to want....  given the willingness to accept replica sails at a lot of clubs, and given the usually b**locks that ensues as a result of it, it looks like LPE are simply providing a 'middle ground' option for those who are committed to the concept of what the laser is all about, without necessarily putting their hands as deep into their pocket as necessary.

Well yes, but the idea that the price is lower "because we don't have to pay the royalties to ILCA" is a bare faced lie.
Back to Top
turnturtle View Drop Down
Really should get out more
Really should get out more


Joined: 05 Dec 14
Online Status: Offline
Posts: 2538 		Post Options Post Options   Quote turnturtle Quote  Post ReplyReply Direct Link To This Post Posted: 06 Jun 18 at 10:14am
Originally posted by bustinben

Originally posted by turnturtle

LPE are simply creating a product that the after market appears to want....  given the willingness to accept replica sails at a lot of clubs, and given the usually b**locks that ensues as a result of it, it looks like LPE are simply providing a 'middle ground' option for those who are committed to the concept of what the laser is all about, without necessarily putting their hands as deep into their pocket as necessary.

Well yes, but the idea that the price is lower "because we don't have to pay the royalties to ILCA" is a bare faced lie.

and I would expect no less from LPE....   Dead  

edit: the same clowns who went to market advertising red ones as faster, and let's not even get started on the abhorrent way their sister / parent / complex shell company structures have treated parents and infants when faced with severed fingers!!!   

I like new boats, but I'd never buy a new Laser from them on principle.  


Edited by turnturtle - 06 Jun 18 at 10:17am
Back to Top
turnturtle View Drop Down
Really should get out more
Really should get out more


Joined: 05 Dec 14
Online Status: Offline
Posts: 2538 		Post Options Post Options   Quote turnturtle Quote  Post ReplyReply Direct Link To This Post Posted: 06 Jun 18 at 10:18am
Mark - can we get the thread re-named from "Laser Arms Race" to "Buggy Finger Chase"?
Back to Top
Riv View Drop Down
Far too distracted from work
Far too distracted from work


Joined: 23 Nov 13
Location: South Devon
Online Status: Offline
Posts: 353 		Post Options Post Options   Quote Riv Quote  Post ReplyReply Direct Link To This Post Posted: 07 Jun 18 at 11:27am
I like Lasers because they are the only boat I can run around on to amuse myself on windless days. Nice flat deck, good non slip. Lot of laughs. Splash!
Mistral Div II prototype board, Original Windsurfer, Hornet built'74.
Back to Top
 Post Reply Post Reply Page  <1 8910

Forum Jump Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.665y
Copyright ©2001-2010 Web Wiz
Change your personal settings, or read our privacy policy