Laser 28 - Excellent example of this great design Hamble le rice |
![]() |
Rossiter Pintail Mortagne sur Gironde, near Bordeaux |
![]() |
List classes of boat for sale |
Farr 3.7 |
Post Reply ![]() |
Page <1 8990919293 112> |
Author | ||
Jack Sparrow ![]() Really should get out more ![]() ![]() Joined: 08 Feb 05 Location: United Kingdom Online Status: Offline Posts: 2965 |
![]() ![]() ![]() ![]() Posted: 10 Jun 16 at 12:47pm |
|
fair point... and given some of the suggestions already voiced, I'd build it for your situation and sail it. If you every wanted to sell it, it would be a relatively easy fix if someone wanted to have it with a permanent daggerboard set up. You'll need to consider your internal framing carefully to deal with the extra slot length. But that's not much of an issue, and if you made a foam/carbon hull you'd have weight to spare for extra frames. You'll not regret it. They are great boats.
|
||
![]() |
||
boatshed ![]() Far too distracted from work ![]() Joined: 12 Apr 05 Online Status: Offline Posts: 457 |
![]() ![]() ![]() ![]() |
|
I doubt you are alone. RS600?? Not really. A 16' long Farr could be nice.
|
||
Steve
|
||
![]() |
||
iiiiticki ![]() Far too distracted from work ![]() Joined: 06 Mar 16 Location: Derbyshire Online Status: Offline Posts: 206 |
![]() ![]() ![]() ![]() |
|
I did like the look of the Farr but it did not seem long enough. Stretch a Byte forward 3' with a bigger sail and a trap......but then it would need shrouds. Sliding 'chairs' then!
|
||
![]() |
||
Jack Sparrow ![]() Really should get out more ![]() ![]() Joined: 08 Feb 05 Location: United Kingdom Online Status: Offline Posts: 2965 |
![]() ![]() ![]() ![]() |
|
But then it gets heavy. But then its difficult to build in your garage. But then it doesn't feel electric even though you aren't going super fast. But then it doesn't have an existing class that is looking like it will enable international events soon. But then you couldn't get that many in a container to do the events.
|
||
![]() |
||
Rupert ![]() Really should get out more ![]() Joined: 11 Aug 04 Location: Whitefriars sc Online Status: Offline Posts: 8956 |
![]() ![]() ![]() ![]() |
|
But then it would carry more weight.
But then it would have speed from waterline length. But then it would be a Contender. |
||
Firefly 2324, Puffin 229, Minisail 3446 Mirror 70686
|
||
![]() |
||
G.R.F. ![]() Really should get out more ![]() Joined: 10 Aug 08 Location: United Kingdom Online Status: Offline Posts: 4028 |
![]() ![]() ![]() ![]() |
|
I must admit the shortness of length (assuming 370) did also put me off, this would predominantly be for sea sailing and even the 390 Solution feels those 30cms lacking between it and a laser and my race boards are at least 390 which is the very minimum length a dinghy should be imv.
So what we want is a 420-30 single handed trap boat with retracting cb, carbon rig and unstayed rig (yes I know, but D1's can hang a kite off an unstayed rig why not a trapeze for us light guys, then we get the best of both worlds if we have to sail it in none wire weather, we get to run by the lee.) Edited by G.R.F. - 12 Jun 16 at 9:58pm |
||
![]() |
||
Do Different ![]() Really should get out more ![]() Joined: 26 Jan 12 Location: North Online Status: Offline Posts: 1312 |
![]() ![]() ![]() ![]() |
|
Seems to be a fair crop shorter boats from the southern hemisphere, I guess because they tend to get bigger breezes so more about planing performance than displacement sailing.
Would a V3000 with a reworked rig be a closer fit to variable UK requirements?
|
||
![]() |
||
JimC ![]() Really should get out more ![]() ![]() Joined: 17 May 04 Location: United Kingdom Online Status: Offline Posts: 6662 |
![]() ![]() ![]() ![]() |
|
Much more, I think, about the traditional sizes for development classes dating back to when people were smaller and building costs were a way bigger deal than they are now. A shorter boat meant it was easier to find knot free timber, and not so expensive, and less material meant a cheaper boat. The Farr 3.7, for instance, evolved out of the 12ft two handed classes. However it was designed as a singlehander, wasn't just a rebadged two hander with the displacement etc all wrong. Edited by JimC - 13 Jun 16 at 8:37am |
||
![]() |
||
Do Different ![]() Really should get out more ![]() Joined: 26 Jan 12 Location: North Online Status: Offline Posts: 1312 |
![]() ![]() ![]() ![]() |
|
Background references always relevant for broader understanding
![]() |
||
![]() |
||
Jack Sparrow ![]() Really should get out more ![]() ![]() Joined: 08 Feb 05 Location: United Kingdom Online Status: Offline Posts: 2965 |
![]() ![]() ![]() ![]() |
|
Nice boat for sale in NZ -
http://www.trademe.co.nz/1104551838 With import you'd be looking at about £1200 to the UK! £872.99 for the boat £500 shipping & import
|
||
![]() |
Post Reply ![]() |
Page <1 8990919293 112> |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |