New Posts New Posts RSS Feed: Rig Tension
  FAQ FAQ  Forum Search   Register Register  Login Login

Rig Tension

 Post Reply Post Reply Page  <1234>
Author
NHRC View Drop Down
Posting king
Posting king


Joined: 13 Dec 13
Location: Lymington
Online Status: Offline
Posts: 102
Post Options Post Options   Quote NHRC Quote  Post ReplyReply Direct Link To This Post Topic: Rig Tension
    Posted: 10 Feb 15 at 12:16am
Higher modulus 

You won't see creep without a micrometer if you can splice correctly.

The ultra modulus SK 99 is even more impressive. You can drop down to 2mm braided and be stronger than Dyform wire and with no creep, IF YOU SPLICE CORRECTLY.
Back to Top
Daniel Holman View Drop Down
Really should get out more
Really should get out more


Joined: 17 Nov 08
Online Status: Offline
Posts: 997
Post Options Post Options   Quote Daniel Holman Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 15 at 12:40am
What about the constructional creep? I.e. bedding in of the braiding? Even the pre stretched 78 max bedded in loads the first time it was used and even with massive bury - don't think they were bad splices.

Back to Top
Woodbotherer View Drop Down
Posting king
Posting king
Avatar

Joined: 11 Dec 14
Online Status: Offline
Posts: 192
Post Options Post Options   Quote Woodbotherer Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 15 at 9:18am
So, as an aside and I came into this game being instructed to put massive rig tension on at all times (Musto Skiff) I now hold the opposite view and have my own theories, but can someone explain to me how it was the Blaze rig is so much faster being sloppy shrouded?
Back to Top
Chris 249 View Drop Down
Really should get out more
Really should get out more
Avatar

Joined: 10 May 04
Online Status: Offline
Posts: 2041
Post Options Post Options   Quote Chris 249 Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 15 at 9:40am
Originally posted by NHRC

The 3.5 mm Dyneema SK99 we have been tested averages at just under 1700kgs.

Where's the emoticon for slack-jawed amazement? I've been out of the loop for such things and that seems to be amazing.
Back to Top
JimC View Drop Down
Really should get out more
Really should get out more
Avatar

Joined: 17 May 04
Location: United Kingdom
Online Status: Offline
Posts: 6662
Post Options Post Options   Quote JimC Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 15 at 9:59am
Originally posted by Woodbotherer

So, as an aside

A trapeze boat with conventional spreaders needs massive rig tension because the trapeze unloads the windward shrouds and reduces effectiveness of the spreaders. Indeed in extreme cases the windward shroud unloads completely and instead of the windward spreader pushing the mid mast to leeward the lee spreader is pushing the mid mast to windward. So crew gets on wire and the mast dumps all the power. A non trapeze boat doesn't have that problem, nor does a trapeze boat with diamonds rather than spreaders.
Back to Top
iiitick View Drop Down
Far too distracted from work
Far too distracted from work


Joined: 04 Jun 14
Location: gb
Online Status: Offline
Posts: 478
Post Options Post Options   Quote iiitick Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 15 at 10:03am
Going back to the beginning of this thread, why would a mirror which is presumably gunter rigged need any rig tension other than to keep the mast up?
Back to Top
JimC View Drop Down
Really should get out more
Really should get out more
Avatar

Joined: 17 May 04
Location: United Kingdom
Online Status: Offline
Posts: 6662
Post Options Post Options   Quote JimC Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 15 at 10:16am
Jib luff?
Back to Top
Jon711 View Drop Down
Far too distracted from work
Far too distracted from work
Avatar

Joined: 04 May 07
Location: United Kingdom
Online Status: Offline
Posts: 465
Post Options Post Options   Quote Jon711 Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 15 at 10:35am
Originally posted by iiitick

Going back to the beginning of this thread, why would a mirror which is presumably gunter rigged need any rig tension other than to keep the mast up?


The OP quoted the figures for a bermudan mast... So that figure sound about right to me, but as Rupert says will not be as important as the correct rake..

Jon
Blaze 711
Back to Top
MerlinMags View Drop Down
Admin Group
Admin Group
Avatar

Joined: 19 Mar 04
Location: UK, Guildford
Online Status: Offline
Posts: 588
Post Options Post Options   Quote MerlinMags Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 15 at 11:42am
Another aside - when I add rig tension to my ancient Merlin, all that happens is the hull's beam reduces slightly!
Back to Top
jeffers View Drop Down
Really should get out more
Really should get out more
Avatar

Joined: 29 Mar 04
Location: United Kingdom
Online Status: Offline
Posts: 3048
Post Options Post Options   Quote jeffers Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 15 at 12:01pm
Originally posted by MerlinMags

Another aside - when I add rig tension to my ancient Merlin, all that happens is the hull's beam reduces slightly!

And the centreboard gets harder to move?
Paul
----------------------
D-Zero GBR 74
Back to Top
 Post Reply Post Reply Page  <1234>

Forum Jump Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.665y
Copyright ©2001-2010 Web Wiz
Change your personal settings, or read our privacy policy