New Posts New Posts RSS Feed: Jib Stick Fittings
  FAQ FAQ  Forum Search   Register Register  Login Login

Jib Stick Fittings
 Post Reply Post Reply
Author
  Share Topic Share Topic  Topic Search Topic Search  Topic Options Topic Options
rb_stretch View Drop Down
Really should get out more
Really should get out more


Joined: 23 Aug 10
Online Status: Offline
Posts: 742 		Post Options Post Options   Quote rb_stretch Quote  Post ReplyReply Direct Link To This Post Topic: Jib Stick Fittings
    Posted: 12 Feb 13 at 6:42pm
I've never used a jib stick before and from what I can tell of my Albacore jib stick, the end fitting that is uppermost looks shot. As you can see in the photograph, the rope has worn a groove that almost acts like a rope cleat. I know the pole inner diameter is 22mm, but having exhaustively trawled the internet I can not find anyone who makes even a vaguely similar fitting (unfortunately no markings on the pole on the fittings to suggest who supplied them). Does anyone have any ideas where I can get one?
 
Back to Top
drifter View Drop Down
Posting king
Posting king


Joined: 09 Jun 08
Location: Oxfordshire
Online Status: Offline
Posts: 177 		Post Options Post Options   Quote drifter Quote  Post ReplyReply Direct Link To This Post Posted: 12 Feb 13 at 7:07pm
Is it a plastic jib pole spike with the sharp bit cut off and a hole drilled? I've done that before. Or a bullseye might do it.
Stewart
Back to Top
JimC View Drop Down
Really should get out more
Really should get out more
Avatar

Joined: 17 May 04
Location: United Kingdom
Online Status: Offline
Posts: 6660 		Post Options Post Options   Quote JimC Quote  Post ReplyReply Direct Link To This Post Posted: 12 Feb 13 at 7:08pm
Deck hardware/deck bushes...
Allen A4329 appears to have a stainless sleeve and 22mm od, but I think you'll need to trim off some external screw holes.
Back to Top
rb_stretch View Drop Down
Really should get out more
Really should get out more


Joined: 23 Aug 10
Online Status: Offline
Posts: 742 		Post Options Post Options   Quote rb_stretch Quote  Post ReplyReply Direct Link To This Post Posted: 12 Feb 13 at 7:10pm
From what I can tell it looks like an original fitting as is, but I wouldn't rule out that possibility. I'll have a hunt for jib pole spikes to see if anything looks suitable.
Back to Top
rb_stretch View Drop Down
Really should get out more
Really should get out more


Joined: 23 Aug 10
Online Status: Offline
Posts: 742 		Post Options Post Options   Quote rb_stretch Quote  Post ReplyReply Direct Link To This Post Posted: 12 Feb 13 at 7:16pm
Originally posted by JimC

Deck hardware/deck bushes...
Allen A4329 appears to have a stainless sleeve and 22mm od, but I think you'll need to trim off some external screw holes.
 
That actually looks better than the original, thanks.
 
I knew the Allen Brothers website existed, but google fails to find it. Only got it through a link from a Y & Y news article on the new website launch.
Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.665y
Copyright ©2001-2010 Web Wiz
Change your personal settings, or read our privacy policy