Jib Sheet Knots |
Post Reply 
|
Page 12> |
| Author |
 Share Topic Printable Version Delicious Digg Facebook Furl Google MySpace Newsvine reddit StumbleUpon Translate Twitter Windows Live Yahoo Bookmarks Topic Search  Topic Options
|
laser193713 
Really should get out more 
Joined: 13 May 09 Location: United Kingdom Online Status: Offline Posts: 889 |
 Post Options
 Quote Reply
 Topic: Jib Sheet KnotsPosted: 19 May 09 at 7:00pm |
|
That is a pretty standard way of doing it and works well, same for kite sheets on asymetrics too unless you have tapered sheets and even then it can still be used if the taper is in the middle of the sheet.
|
|
 |
|
|
Captain Morgan
Far too distracted from work 
Joined: 03 Sep 08 Location: United Kingdom Online Status: Offline Posts: 211 |
Post Options
Quote Reply
Posted: 18 May 09 at 3:39pm |
|
Choices, choices! Thanks for the replies. I'm still not sure which method is most suitable, but for now I think that I'll go with the larks foot and connect the two ends in the cockpit. I'm guessing, bt I'd say that this would minimise weight at the clew, as well as being secure.
|
|
|
|
|
alstorer
Really should get out more
Joined: 02 Aug 07 Location: Cambridge Online Status: Offline Posts: 2899 |
Post Options
Quote Reply
Posted: 15 May 09 at 6:41pm |
This would be my favoured method I reckon, and is close to how we've got our spinnaker sheets- not an issue on the B14 jib though as we've got 2:1 jib sheets. (and ratchets. and cleats. The loads are rather high) |
|
|
-_
Al |
|
|
|
|
ASok
Really should get out more
Joined: 26 Sep 07 Location: United Kingdom Online Status: Offline Posts: 739 |
Post Options
Quote Reply
Posted: 15 May 09 at 3:22pm |
|
On the Dart its a continuous system with a clip for the jib. On any other boat (including yachts) I have always tied bowline. I think that they are undoubtedly the most reliable knots and won't shake loose. Also easy to undo when you've given them a high load unlike stoppers.
|
|
|
|
|
Captain Morgan
Far too distracted from work
Joined: 03 Sep 08 Location: United Kingdom Online Status: Offline Posts: 211 |
Post Options
Quote Reply
Posted: 15 May 09 at 2:33pm |
|
After yet more googling - I found this courtesy of Wayfarer-International: http://www.wayfarer-international.org/WIT/race.related/Riggi ngTips/TonJaspers/TJhalsheet.html I guess that the Fisherman's Knot method that JimC has just described is in there - Looks promising. Has anyone tried this, and similarly the same arrangement with the two Figure-of-eight knots? |
|
|
|
|
JimC
Really should get out more
Joined: 17 May 04 Location: United Kingdom Online Status: Offline Posts: 6662 |
Post Options
Quote Reply
Posted: 15 May 09 at 2:16pm |
|
I usually pass both sheets through the jib clew, then tie an overhand knot on each end round the opposite sheet. This effectively gives you a fisherman's knot with the clew in the middle. This is good for asymettric kites too, especially if you tape across the clew to reduce what can catch on the jib luff.
However if there's plenty of room I might have a light line attached to the clew with a lark's foot, and then each end tied to the full size jib sheet with a double sheet bend. |
|
|
|
|
Captain Morgan
Far too distracted from work
Joined: 03 Sep 08 Location: United Kingdom Online Status: Offline Posts: 211 |
Post Options
Quote Reply
Posted: 15 May 09 at 2:10pm |
Yes - This is the system that I was thinking about. Damn! I never thought to consider the weight issue (with bowlines). I don't think that I can be bothered tapering the ends of the jib sheets though. |
|
|
|
|
Contender 541
Really should get out more
Joined: 05 Dec 05 Location: Burton on Trent Online Status: Offline Posts: 1402 |
Post Options
Quote Reply
Posted: 15 May 09 at 1:32pm |
|
On the 5oh we have continuous jib sheets with the 'open end' at the jib. The open ends are tapered and these tapers are connected to the jib via a bowline |
|
|
When you find a big kettle of crazy it's probably best not to stir it - Pointy Haired Boss
Crew on 505 8780 |
|
|
|
|
radixon
Really should get out more
Joined: 27 Oct 06 Location: United Kingdom Online Status: Offline Posts: 2407 |
Post Options
Quote Reply
Posted: 15 May 09 at 1:23pm |
|
Depends on the boat and the wind. Tying a bowline uses more rope and therefore more weight at the clew, using a figure of 8 is best, or you could do i larks foot and join in the boat instead. |
|
|
|
|
stuarthop
Really should get out more
Joined: 22 Dec 04 Location: Nottingham Online Status: Offline Posts: 1040 |
Post Options
Quote Reply
Posted: 15 May 09 at 1:11pm |
|
I use a tiny boble and a bowline permanently tied clos to the end of the sheet, I'll take a photo tommorow if i remeber, otherwise i tend to tie the sheets in the boatdont like knots hanging off the clew of the jib.
|
|
|
|
|
|
|
|
Post Reply
|
Page 12> |
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Copyright ©2001-2010 Web Wiz
Change your personal settings, or read our privacy policy