| Free mast for Merlin Rocket - has a bend! Guildford |
![]() |
| Rossiter Pintail Mortagne sur Gironde, near Bordeaux |
![]() |
| Bruce Roberts classic 45 Valencia, Spain |
![]() |
List classes of boat for sale |
Varnish that actually works? |
Post Reply
|
Page 12> |
| Author | |
tink
Really should get out more
Joined: 23 Jan 16 Location: North Hants Online Status: Offline Posts: 789 |
Post Options
Quote Reply
Topic: Varnish that actually works?Posted: 16 Dec 20 at 6:06pm |
Another vote for Epifanes, keep working the wet edge and don’t got back over where you have varnished particularly with Epifines. I always use a simple polyurethane tent over the area and an oil filled radiator- economical and no blowing. You need to pre heat the boat for 24 hours. Do not varnish and the turn on the heat you will get lots of bubbles. The secret to varnishing is a very clean brush - what people think is dust contamination is dried varnish coming out from deep inside the brush. PS - sold my wooden boat but having moved bought a Laser as we have 365 days a year sailing (Normal year)
|
|
|
Tink
https://tinkboats.com http://proasail.blogspot.com |
|
![]() |
|
epicfail
Groupie
Joined: 01 Dec 19 Online Status: Offline Posts: 61 |
Post Options
Quote Reply
Posted: 15 Dec 20 at 9:22pm |
|
I have an old Rondar, the thwart is some sort of hardwood. It was covered in something that was well past it's best. I ended up using some generic yacht/exterior varnish - it's had plenty of time to go off between coats and actually looks ok. It will be interesting to see how well it lasts. Now the aged RWO traveller looks a bit xxxx
Edited by epicfail - 15 Dec 20 at 9:23pm |
|
![]() |
|
Paramedic
Really should get out more
Joined: 27 Jan 06 Location: United Kingdom Online Status: Offline Posts: 929 |
Post Options
Quote Reply
Posted: 15 Dec 20 at 9:07am |
It wasn't, it was dry. Its not the same thing :) If you handle it or got it wet you would have marked it or sent it milky - whether this bothers you is another matter. Even two pack varnishes aren't properly hard until 36-48 hours after application in summer.
|
|
![]() |
|
jeffers
Really should get out more
Joined: 29 Mar 04 Location: United Kingdom Online Status: Offline Posts: 3048 |
Post Options
Quote Reply
Posted: 01 Dec 20 at 12:26pm |
|
Epifanes or Hempel Favourite both go hard. At this time of year you will find they will be set in around 16 hours but will take a week or so to fully harden off. In the summer it is more like a couple of days to be fully cured.
|
|
|
Paul
---------------------- D-Zero GBR 74 |
|
![]() |
|
DiscoBall
Far too distracted from work
Joined: 03 Jan 05 Online Status: Offline Posts: 305 |
Post Options
Quote Reply
Posted: 01 Dec 20 at 12:16am |
|
Think I just used international original. However, my boat is in a minority as most Europes have teak thwarts which don't need varnishing. Which boat do you have?
|
|
![]() |
|
H2
Really should get out more
Joined: 26 Jul 17 Online Status: Offline Posts: 750 |
Post Options
Quote Reply
Posted: 30 Nov 20 at 7:23pm |
|
I just used blakes dura-gloss to varnish my carbon mast. Its in an unheated garage and was hard well within the stated 8 hours!
|
|
|
H2 #115 (sold)
H2 145 OK 2082 |
|
![]() |
|
davidyacht
Really should get out more
Joined: 29 Mar 05 Online Status: Offline Posts: 1345 |
Post Options
Quote Reply
Posted: 30 Nov 20 at 4:21pm |
The rescue boat for our school sailing club was a rowing boat, which would require somebody to sail in and row back out again should it be required
|
|
|
Happily living in the past
|
|
![]() |
|
Rupert
Really should get out more
Joined: 11 Aug 04 Location: Whitefriars sc Online Status: Offline Posts: 8956 |
Post Options
Quote Reply
Posted: 30 Nov 20 at 9:04am |
|
Not sure toxic fumes fall in the same category as the above. Long term health damage makes me cautious.
|
|
|
Firefly 2324, Puffin 229, Minisail 3446 Mirror 70686
|
|
![]() |
|
Noah
Really should get out more
Joined: 29 Dec 04 Location: United Kingdom Online Status: Offline Posts: 611 |
Post Options
Quote Reply
Posted: 30 Nov 20 at 7:46am |
Way off topic, but really? How are kids supposed to learn a) how to cook and b) how to mitigate risks if they are never exposed to an active kitchen?
|
|
|
Nick
D-Zero 316 |
|
![]() |
|
423zero
Really should get out more
Joined: 08 Jan 15 Location: United Kingdom Online Status: Offline Posts: 3420 |
Post Options
Quote Reply
Posted: 30 Nov 20 at 7:13am |
|
We have all become environmentalists and risk averse, I won't let the kids in the kitchen if there's cooking going on or use the mower or shears. I had to do loads of dangerous things when I was a kid, I was in charge of lighting the fire and loads of chores that I think are dangerous now, where are we all going?
|
|
|
Robert
|
|
![]() |
|
Post Reply
|
Page 12> |
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |