RS600 buying advice needed

PS - just seen your post on the 600 forum with picture, my guess on the cause would be the daggerboard. I did exactly the same on my 600 in the same area, pulled the daggerboard up and while it was still vertical but clear of the case top it slipped out of my hand and basically lived up to it's name, and punctured the outer skin on the floor next to the case. I just filled it with epoxy and gelcoated over the top, and used a paintbrush to get the stippled effect. I kept the boat for at least a year and it held fine.

Author	Message Share Topic Printable Version Delicious Digg Facebook Furl Google MySpace Newsvine reddit StumbleUpon Translate Twitter Windows Live Yahoo Bookmarks Topic Search Topic Options Post Reply Create New Topic
Jamie600 Send Private Message Find Member's Posts Really should get out more Joined: 14 Jun 05 Online Status: Offline Posts: 718	Post Options Post Reply Quote Jamie600 Report Post Quote Reply Topic: RS600 buying advice needed Posted: 05 Oct 13 at 9:21pm
	PS - just seen your post on the 600 forum with picture, my guess on the cause would be the daggerboard. I did exactly the same on my 600 in the same area, pulled the daggerboard up and while it was still vertical but clear of the case top it slipped out of my hand and basically lived up to it's name, and punctured the outer skin on the floor next to the case. I just filled it with epoxy and gelcoated over the top, and used a paintbrush to get the stippled effect. I kept the boat for at least a year and it held fine.
	RS600 1001

Jamie600 Send Private Message Find Member's Posts Really should get out more Joined: 14 Jun 05 Online Status: Offline Posts: 718	Post Options Post Reply Quote Jamie600 Report Post Quote Reply Posted: 05 Oct 13 at 9:06pm
	From the description it sounds OK, forget about the pro-repair, Ashdown will have made it as if it never happened. The repair to the floor, if done as described, should be fine too, it's been done by the book, sounds like the only issue is the matching of the gelcoat, which you can always try to improve one. Depending on the sail number it could be knocking on 20 years old, expect it to have some battle scars!
	RS600 1001

Ruscoe Send Private Message Find Member's Posts Really should get out more Joined: 12 Jan 10 Online Status: Offline Posts: 1514	Post Options Post Reply Quote Ruscoe Report Post Quote Reply Posted: 04 Oct 13 at 8:22pm
	https://www.facebook.com/photo.php?fbid=10201085849641496&set=gm.594708290568620&type=1&relevant_count=1&ref=nf Worlds cheapest 600 for sale here, he will help with delivery but needs gone ASAP!


L123456 Send Private Message Find Member's Posts Really should get out more Joined: 30 Apr 12 Online Status: Offline Posts: 500	Post Options Post Reply Quote L123456 Report Post Quote Reply Posted: 04 Oct 13 at 10:35am
	The fact the guy is being so honest would perhaps make him a better vendor than the guy that mentions nothing ... Any repair by Ashdown is as good as new.

yellowwelly Send Private Message Find Member's Posts Really should get out more Joined: 24 May 13 Online Status: Offline Posts: 2003	Post Options Post Reply Quote yellowwelly Report Post Quote Reply Posted: 04 Oct 13 at 9:03am
	If it was repaired by Ashdown Marine I would have zero hesitations about the quality of the repair. Good luck you are about to learn a lot

RS400atC Send Private Message Find Member's Posts Really should get out more Joined: 04 Dec 08 Online Status: Offline Posts: 3011	Post Options Post Reply Quote RS400atC Report Post Quote Reply Posted: 04 Oct 13 at 8:09am
	These boats tend to be cheap to buy now, but a new sail is a lot relatively. So I'd be more concerend about getting a good sail than a few cosmetically dodgy repairs. A point to watch is the back corner of the racks, mine were cracked around the welds, under the pro-grip. Good Luck with it, 600's are a lot of fun.

winging it Send Private Message Find Member's Posts Really should get out more Joined: 22 Mar 07 Online Status: Offline Posts: 3958	Post Options Post Reply Quote winging it Report Post Quote Reply Posted: 04 Oct 13 at 7:35am
	or without knowing what the price is
	the same, but different...

mongrel Send Private Message Find Member's Posts Far too distracted from work Joined: 27 Aug 08 Online Status: Offline Posts: 304	Post Options Post Reply Quote mongrel Report Post Quote Reply Posted: 04 Oct 13 at 7:26am
	At least the guy's being honest. I'm sure lots of dinghies change hands with much worse hidden damage that's never mentioned. But I don't think anyone on here will commit to saying "the boat will be fine, just buy it", without seeing it, or at least seeing pictures.

dohertpk Send Private Message Find Member's Posts Posting king Joined: 28 Sep 12 Online Status: Offline Posts: 172	Post Options Post Reply Quote dohertpk Report Post Quote Reply Posted: 04 Oct 13 at 3:34am
	Sorry to fill up the forum with newbie questions, but I'd appreciate yet more of your time and insight. I've found a line on a RS600 which is more or less perfect. The seller has been very forthcoming about the various repairs performed to the boat. However, to my shame, I know very little about hull maintenance. Below I quote the two repairs which concern me the most. The seller describes the damage and the repair. DAMAGE AND REPAIR 1: '...damage to the bow happened when...[s]omeone gybed onto port directly in front of me and I hit his rack. It made a rack shaped hole in the bow. I took the boat straight to Ashdown Marine. At the time they were doing most RS repairs and had the moulds for the boat. The repair is completely solid and invisible, you would not find it if I had not mentioned it.' DAMAGE AND REPAIR 2: ' I found a small (1 cm) crack in the floor and repaired it with epoxy and a few layers of glass. Cosmetically, it could do with tidying up.' 'The hole in the floor I only noticed a couple of days ago...I am not sure how it happened, most damage is caused by trapeze hooks, but this seems too low. It was a small split less than a centimetre long. I used a Dremel to take the surface well back from the split so there is no propagation of water into the core. The repair is solid, but the gelcoat appearance is not good. I am not sure the best way to match the non-slip.' Are the above mentioned issues reasons to walk away from the deal? What kind of questions should I be asking? Also, please note that I have omitted some details to protect the seller's identity and that the seller has given me explicit permission to quote him in this post. I can't view the boat before viewing so am relying on pictures. Many thanks for your help. Peter