V Twin

It depends on the forecast and wether some glitches have been sorted, the snowboard ratchets were not long enough for example, the spinnaker was blue not black, do i want to use it, the jib pole still wasn't sorted last we spoke, so don't hold your breath..

Steady on, I've been working with volumes and rockers and hull weights and displacement since before Bethwaite jnr could swim. I think y'all tend to forget the jolly old historical pedigree..

Here's a few things y'all might not know.

1976 - Built the first boat ever to be built from Kevlar, revolutionary hull design finished 2nd overall in the race series of that year due to engine failure.

1979 - Introduced 1st retracting centreboard to windsurf hull

1980 -Designed 1st mast track for displacement windsurf board

1981- Designed and built Div 2 Hollow construction race board at Parkers Used Gybing Centreboard later that year

That's just a snippet from the early days...

 I calculated very carefully the volume and dimensions I needed to do what I need to do, and to support the rig weight that I thought it might end up needing, it's actually quite a low volume for it's footprint and it's heavier than I'd intended, that due to expense, at this stage it didn't make too much sense throwing money at very hi tech lay up for something that might just end up as a male plug for a mould or be a back to the drawing board catastrophe.

 Don't forget I also had the benefit of assistance of Dan Holman his computer programme also worked out lots of the calculations and he was able to reduce my notebook maths to something more scientific, so it's not actually as flippant as my banter might suggest at times.

I respond thus because you're one of the guys on here that I do actually care what you might think.