Please select your home edition
Edition
Pro-Set 728x90

West System International used in building an 18th century Gajeta - Part 3

by Jake Kavanagh 12 Feb 08:00 GMT
The finished Croatian Gajeta on display at a local boat show. She would later be raced in an annual regatta to prove the advantage of her lightweight construction © West System International

In a boatyard in Croatia, an 8-metre Croatian Gajeta is being built with a merger of new materials and traditional skills. At this stage of the project, it is ready to receive its first set of planks. To avoid using nails or screws in the build, everything will be held together with WEST SYSTEM epoxy.

(See part 1 and see part 2)

Part 3 - Base layer planking

Despite many hours of work, our traditionally-styled but otherwise ultra-modern Gajeta remains little more than a set of plywood formers. However, these have been used to make several parts of the kit that have been stored until needed later. In the last update, for example, we saw how the CNC (computer numerical control) cutter had shaped the various timbers for the frames, which were then laminated together to give solid pieces of hardwood with beautifully symmetrical shapes.

Now the builders at the Betina Shipyard can start to create the base layer of cedar batons, over which two thin layers of mahogany veneers will be attached in a double diagonal method of construction

The complete boat was bonded together with WEST SYSTEM® Epoxy, explains the projects designer, naval architect Srdan Dakovic. Once the planking was completed, it was sheathed in several layers of 300-gsm biaxial cloth. The idea was that this boat wouldnt have a single metal screw in its basic construction, although stainless steel staples were used for the double diagonal. Long-lived and corrosion-free epoxy would ensure a much lighter and stronger boat.

However, before it could be sheathed, the team had to make a stable hull shape. They began with the cedar strip planking that would provide a strong base layer.

Sitting astride the upturned jig, a worker begins to fix the guide batons into place. Note how he is using offcuts to ensure the correct positioning. There will be five batons between each of the guides from keel to gunwale.

With the positions identified, now the rest of the guide batons can be attached to the plywood formers underneath. Note how the formers have plastic along the edges to allow for easy release of the finished hull.

The guide batons have allowed the boatbuilders to mark the positions of each strip and to cut them to length. The batons, made of cedar, are all identical in width and depth and are glued to each other on both sides using WEST SYSTEM Epoxy thickened with 406 Colloidal Silica. The plastic-covered glue table is in the foreground, where the strips are moved from the trestles beside it for application of the thickened epoxy.

The hull takes shape, with the batons held in place with screws through washers. To ensure easy release, the screws are first sprayed with a fine mist of vegetable oil. Once the epoxy has hardened all the screws and washers are withdrawn so no fastenings are left behind. Note how the planks from one side overlap those of the other. They will be trimmed back later.

As the planking advances, a template of the outer keel is offered up to ensure the shape is correct. The outer keel has already been made in sections by the CNC machine and is sourced from strips of solid mahogany that have been assembled into a rough shape before the final cut and trim. You can just see the laminated structure in the picture. Note also the shallow angle of the scarf joints along the base.

Both sides of the hull join at the keel. The first rows of screws are in the process of being removed and the hull sanded to abrade back any squeezed-out epoxy.

The beauty of epoxy is that unlike polyester resin (fibreglass) there is virtually no shrinkage or distortion as the epoxy cures. The cedar strip hull shape is now resting on the inner keel and plywood formers under its own weight.

Time to assemble the outer keel, but first it has to be checked for a good fit. Here you can see the three sections positioned together on the floor beside the hull. Note also a strip of mahogany draped over the chine (curve of the underwater hull) and being checked for the correct width and angle.

A perfect fit hardly surprising really due to the accuracy of the CNC process. The build time is also greatly reduced as components arrive pre-shaped, with very little remedial work needed for them to drop into place. It all goes together like a giant Lego kit, Srdan reminds us.

A view from aft. The screw removal process is now well underway and the sanding will continue to ensure this base layer of strips is as smooth as possible. The hundreds of screw holes and any gaps in the planking will soon be filled with epoxy from the first layer of mahogany overlay. You can see another view of the test strip being offered up, with marker pen lines to ensure the rest lie the same way.

Next time: Putting down the double diagonal planks and getting ready for epoxy sheathing.

See more stories and tips at: epoxycraft.com/category/blog

Related Articles

The Longbow Jet Hydroplane project
Epoxy and wood hull built to beat the current water speed record A team of British enthusiasts is building a jet-powered boat to beat the current water speed record of 317mph. WEST SYSTEM® Epoxy will be holding it all together. Posted on 14 Feb
Oarsome Chance - Learning about epoxy and life
West System support Portsmouth charity helping young boatbuilders Oarsome Chance is a charity where young people who have been excluded from mainstream education learn to work with their hands. This practical training is also combined with learning about business and how raw materials can be turned into saleable items. Posted on 11 Feb
Building an 18th century Gajeta part 2
West System epoxy products used for bonding In a remarkable project that combines traditional boatbuilding skills with modern techniques, a Croatian Gajeta receives its primary wooden framework, cut by computer and bonded with WEST SYSTEM® epoxy. Posted on 16 Jan
WSI product of the month: G/flex 650 Epoxy
Copes with stresses from expansion, contraction, shock or vibration G/flex 650 Epoxy is described as a 'toughened, resilient two-part epoxy engineered for a superior grip to metals, plastics, glass, masonry, fibreglass and wet and difficult-to-bond woods.' Posted on 28 Dec 2018
Avoiding the 'orange peel' effect
Expoxy advice from the experts at West System You've applied a fresh coat of epoxy and the coat seems to have fish-eyed into a series of tiny craters. What has caused this and how do you prevent it from happening again? Posted on 26 Dec 2018
Wessex Resins producing bio-based ENTROPY RESINS
For the European, Middle Eastern, African, Turkish, and Indian markets Wessex Resins is delighted to announce it is now manufacturing ENTROPY RESINS, under license from Gougeon Brothers, Inc., for the European, Middle Eastern, African, Turkish, and Indian markets. Posted on 13 Nov 2018
WSI live demos of WEST SYSTEM® Epoxy Products
At TheYachtMarket.com Southampton Boat Show WSI will be running a series of live demonstrations on their stand (J401, Ocean Hall) at TheYachtMarket.com Southampton Boat Show showing visitors how to get the most from our epoxy products. The Show takes place from 14th to 23rd September 2018. Posted on 12 Sep 2018
Spirit Yachts – The ultimate racing machine?
Traditional timber, carbon fibre and PRO-SET epoxy to make a high-performance head turner The Spirit 52D has combined traditional timber, carbon fibre and PRO-SET epoxy to make a high-performance head turner. Posted on 10 Sep 2018
WSI live demos of West System Epoxy Products
At TheYachtMarket.com Southampton Boat Show 2018 WSI team will be on hand throughout the Show to answer any questions about the company's WEST SYSTEM® products. WSI's technical experts will be able to offer advice on visitors' projects and the use of epoxy for boat building, repair and maintenance. Posted on 10 Aug 2018