Please select your home edition
Edition
Craftinsure 2012

Spindrift 2 begins a Jules Verne attempt as the GGR 2018 nears its end

by David Schmidt 22 Jan 20:00 GMT January 22, 2019
Spindrift 2 training ahead of their 2019 Jules Verne record attempt © Chris Schmid / Spindrift racing

While the sport of sailing is incredibly diverse, with great competition unfurling in boats as modest as Optimists and as mighty as the elegant J Class yachts, there's something particularly magical about contests that involve circumnavigation sailing. Here, not only are sailors racing against other boats or against a reference time, but they are also dealing with the forces of nature to a far greater extent than regatta sailors. After all, while a dearth of wind can wreck an afternoon of windward-leeward racing, typically speaking, race committees act mercifully after a few hours of postponement, giving everyone (themselves included) a night's sleep in a dry, comfortable bed; around-the-world racing, not so much.

Interestingly, there are currently two circumnavigation races unfurling, using radically different levels of technology and realizing radically different levels of VMG performance. However, sailors competing in both races must confront and work with nature's same elements.

Just ask Jean-Luc Van Den Heede (FRA; 73) or Mark Slats (NED; 41), who are the two frontrunners in the Golden Globe Race 2018 (GGR 2018). This race, which began in Les Sables-d'Olonne, France on July 1, uses period-specific vessels (read: full keels), navigation and communications technology (read: sextants and single sideband radios and no race-legal weather-routing options), and sailcloth (read: Dacron) to emulate the trials and tribulations experienced by Sir Robin Knox-Johnston and the other competing skippers in the original Sunday Times Golden Globe Race of 1968-1969.

For anyone just tuning in, Van Den Heede once enjoyed a lead of 2,000 nautical miles before a vicious knockdown in the Southern Ocean on November 1, 2018, damaged his rig, forcing the Frenchman to play a far more conservative game than he would otherwise like. Slats, sitting in second place, of course capitalized on this mechanical weakness and whittled Van Den Heede's lead down to just 28 nautical miles last week.

Still, fate and fortune have ways of ensuring that misery is equally shared, and last week word broke that Slats freshwater supply is exhausted, forcing the Dutchman to spend significant amounts of time each day hand-pumping his daily rations of potable water.

Moreover, a windless high-pressure system off of the Azores was a key factor in Slats' impressive juggernaut, however Van Den Heede has now re-stretched his lead to a more comfortable 233 nautical miles, with just 862 nautical miles separating Matmut's bow from the Les Sables-d'Olonne finishing line. Slats, sailing aboard his Rustler 36 The Ohpen Maverick, is directly south of Van Den Heede's Matmut, which is another Rustler 36, making this a One Design race-within-a-race.

Still, 862 miles is still 862 miles, and a lot can unfurl over this distance, especially when the steeds are only capable of delivering speeds of 4.9 knots in current conditions. But, given that the yachts are now both in the same weather system, and given that both skippers have had their knuckles rapped for not having valid HAM radio licenses, much could come down to the strength of Van Den Heede's rigging-repair efforts, Slats' ability to desalinize water, and both skippers' abilities to accurately read the clouds.

Meanwhile, skipper Yann Guichard (FRA) and his team aboard the 131-foot, state-of-the-art maxi trimaran Spindrift 2 crossed the imaginary starting line separating the Créac'h lighthouse on Ushant Island, France, and the Lizard Lighthouse, in Cornwall, England, to begin their attempt on the Jules Verne Trophy for the fastest all-out and fully crewed circumnavigation record last week.

Unlike Slats, Van Den Heede, and the other GGR 2018 skippers, Guichard and his crew are using cutting-edge communications, satellite-based weather routing, and onboard instrumentation, and have been regularly reporting speeds in the high 20s as they attempt to best the standing record of 40 days, 23 hours, 30 minutes and 30 seconds, which was set by skipper Francis Joyon aboard the 105-foot trimaran IDEC Sport in 2017.

For reference, Joyon and crew sailed 26,412 miles at an average pace of 26.9 knots, meaning that Guichard and company have a very fast bar to exceed in their hunt for a new record.

At the time oft his writing, Spindrift 2 was some 515.3 miles ahead of IDEC Sport's reference time, but with 18,825.2 nautical miles of sailing left to go before Spindrift 2 re-crosses the line between the Créac'h and Lizard lighthouses, a lot of question marks remain intact. But, given that the Spindrift 2 team reached the equator in just 4 days, 19 hours and 57 minutes (a yet-to-be-ratified new record), it's fair to say that Guichard and crew are off to a smokin'-fast start.

May the four winds blow you safely home.

David Schmidt
Sail-World.com North American Editor

Related Articles

Podcast: 50 knots across Sydney Harbour
Andy Rice & Mark Jardine discusss the launch of SailGP SailGP... it's been a long time coming but now the day is upon us and these boats have been looking sensational on Sydney Harbour. Posted on 14 Feb
This one goes to eleven!
So that quickly and firmly establishes this as an homage to Spinal Tap... Right. So that quickly and firmly establishes this as an homage to Spinal Tap. However, in reality, what we are dealing with is the impending commencement of all things SailGP. Posted on 10 Feb
The Future of Sailing webinars
View the full series so far Liz Rushall of Rushall Marketing, Mark Jardine, Editor of YachtsandYachting.com and Sail-World.com, and Alistair Dickson from the RYA Sport Participation Team have run a series of webinars over the last 12 months. Posted on 9 Feb
The pleasure and the pain
If you have done enough racing, chances are you've had your share of issues If you have done enough racing, chances are you've had more than your share of going from boiled lollies to chocolates. Posted on 3 Feb
Make 2019 count!
Gael Pawson's thoughts on how we as sailors can reduce plastic waste "It's just one cup..." but if every one of us reduces our plastic waste consumption by just one item every day it will make a huge impact. So how about we all take one step towards a more sustainable sailing life. Posted on 31 Jan
The story of WetsuitOutlet.co.uk
The global marine retailer working with manufacturing partners We recently caught up with Ian Homan of Wetsuitoutlet.co.uk and Tristan Hutt of Zhik, about how they work together, and the size and reach of the online retailer based in Shoeburyness, Essex. Posted on 29 Jan
Big names. Bigger guns!
Guns don't get any bigger than Spindrift 2! Guns don't get any bigger than Spindrift 2! She has replaced her own record for the dash to the equator by an hour and 48 minutes. In doing so, she set an as yet to be ratified time of four days, 19 hours and 57 minutes. Posted on 27 Jan
Investing for the future: New machinery at Allen
Major investment in Haas VF-2 Vertical Machining Centre Exactly a year ago, Allen Brothers purchased a Haas VF-2 Vertical Machining Centre or VMC for short – part of a major investment for the company of over £100,000. This has doubled their capacity for producing some of their top-end fittings. Posted on 22 Jan
Budget Ultra-High Performance Sailing
One of the best bang-for-your-buck boats that I've seen On a cold winter's day down at Marconi Sailing Club I took a look at what could be the best bang-for-your-buck boat I've seen. A truly budget high-performance double-hander in the form of Tristan Walker-Hutt and Tom Clayton's International 14 'Fawkes'. Posted on 14 Jan
It's all about wings (again…)
In what may seem like back in the Jurassic age, well certainly in a sailing sense anyway... In what may seem like back in the Jurassic age, well certainly in a sailing sense anyway, a certain, special, and never-before-seen keel was unleashed on the world. It had some wings on either side of a much reduced wetted surface area fin... Posted on 13 Jan