Print Page | Close Window

Magno Gennaker Pole how to rig?

Printed From: Yachts and Yachting Online
Category: Dinghy classes
Forum Name: Technique
Forum Discription: 'How to' section for dinghy questions and answers
Printed Date: 01 Dec 21 at 4:24pm
Software Version: Web Wiz Forums 9.665y -

Topic: Magno Gennaker Pole how to rig?
Posted By: John Workman
Subject: Magno Gennaker Pole how to rig?
Date Posted: 27 Sep 18 at 3:09pm

I've acquired a used Magno. It has a gennaker pole but with no rope coming out the front end. Rigging instructions seem to say to attach the foot of the gennaker to a rope coming from the front end of the pole. Any suggestions on what to do please?


Posted By: JimC
Date Posted: 27 Sep 18 at 3:42pm
Have you read this?
Basically the spinnaker halyard should go through a block at the bottom of the mast, forward to a free floating block on the end of a piece of line disappearing into the pole,and then back to the cleat. So the question is how much is missing. If you still have that block and line, but its come unthreaded then just rethread it.
It goes right through the pole, I don't think there's anything complicated about it. Fencing wire is handy amongst other ways of threading it.. If you haven't got the block and line its possibly easiest to contact Topper and have them tell you what the correct bits are.

Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.665y -
Copyright ©2001-2010 Web Wiz -