J24 (Sail No. 4239) Dartmouth |
29er GBR 074 Tynemouth |
Laurent Giles 'Jolly Boat' Exeter |
List classes of boat for sale |
splicing braid on braid |
Post Reply |
Author | |
Do Different
Really should get out more Joined: 26 Jan 12 Location: North Online Status: Offline Posts: 1312 |
Post Options
Quote Reply
Topic: splicing braid on braid Posted: 15 Mar 12 at 10:06pm |
Splicing. I can do twelve strand no bother, running and fixed loops.
Am I trying the impossible trying to splice as small as 4mm braid on braid, excel pro, there just doesn't seem enough room / give in the outer to create a covered loop. Thanks.
|
|
Isis
Really should get out more Joined: 01 Sep 05 Online Status: Offline Posts: 2753 |
Post Options Quote Reply Posted: 16 Mar 12 at 12:29pm |
Its not impossible, but it is a lot of work.
The best tip is to get inventive with your choice of fid. At that diameter even the smallest proper fids are too big. Doubled-over seizing wire is usually my choice. And patience, lots of patience.... |
|
Isis
Really should get out more Joined: 01 Sep 05 Online Status: Offline Posts: 2753 |
Post Options Quote Reply Posted: 16 Mar 12 at 12:56pm |
...That said, Ive just re-read your post.
I dont have any on hand to check, But I thought Excel Pro was a twisted polyester core as opposed to a braid-on-braid? If thats the case you will have significantly more trouble. Its still technically possible, but the technique is different to a double braid splice and the difficulty/success ratio means its probably not worth doing unless you really really want to. |
|
Do Different
Really should get out more Joined: 26 Jan 12 Location: North Online Status: Offline Posts: 1312 |
Post Options Quote Reply Posted: 16 Mar 12 at 1:27pm |
Sorry you're correct, now checked, I should have said New Excel Racing (12 strand dyneema core).
Thanks for advice and confirming it's a tight one to manage. Good tip on the folded wire, one more try before a re-think. |
|
Do Different
Really should get out more Joined: 26 Jan 12 Location: North Online Status: Offline Posts: 1312 |
Post Options Quote Reply Posted: 16 Mar 12 at 1:38pm |
It's for a tail on my 2:1 jib halyard. The current (getting a bit worn) three strand which every-one uses tends to impart a twist as you pull it over the top sheave which then tries to spin up the furler just as it reaches the top. In truth some of the twist also comes from the wire running over the sheave.
Present solution is a piece of sacrificial tape on the top spinner, may just stick with that and status quo. I suppose if it really bugs me that much I could replace the twisted wire halyard with twelve strand.
|
|
laser193713
Really should get out more Joined: 13 May 09 Location: United Kingdom Online Status: Offline Posts: 889 |
Post Options Quote Reply Posted: 16 Mar 12 at 1:41pm |
Has anyone tried that rooster splicing tool, basically an expensive version of doubled up wire? Is it any good? Could be the tool for the job if it actually works.
|
|
timeintheboat
Really should get out more Joined: 01 Feb 07 Location: United Kingdom Online Status: Offline Posts: 615 |
Post Options Quote Reply Posted: 16 Mar 12 at 1:51pm |
Yes I have one for continuous line splicing and it works OK. The wire loop as supplied was too big so had to be pinched down. Practice in front of the telly before trying in the dinghy park! Edited by timeintheboat - 16 Mar 12 at 1:51pm |
|
Like some other things - sailing is more enjoyable when you do it with someone else
|
|
fudheid
Far too distracted from work Joined: 21 Apr 11 Location: 51.53 N 01.28 E Online Status: Offline Posts: 241 |
Post Options Quote Reply Posted: 16 Mar 12 at 1:54pm |
Take it to a sailmaker and get it sewn? works for me.
|
|
Cheers you
only me from over the sea...... |
|
Post Reply |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |