J24 (Sail No. 4239) Dartmouth |
29er GBR 074 Tynemouth |
Laurent Giles 'Jolly Boat' Exeter |
List classes of boat for sale |
Sheared screws in mast step |
Post Reply | Page <123 |
Author | |
Sam.Spoons
Really should get out more Joined: 07 Mar 12 Location: Manchester UK Online Status: Offline Posts: 3398 |
Post Options
Quote Reply
Topic: Sheared screws in mast step Posted: 18 Jul 19 at 9:10am |
The hardest thing to find will be the left handed drills (well, a lathe to drill the guide bolts, but I guess that's not relevant in this case), Amazon is you friend. Much easier with larger, and clean, un-corroded, bolts though
|
|
Spice 346 "Flat Broke"
Blaze 671 "supersonic soap dish" |
|
JimC
Really should get out more Joined: 17 May 04 Location: United Kingdom Online Status: Offline Posts: 6649 |
Post Options Quote Reply Posted: 18 Jul 19 at 9:11am |
The big trouble with these techniques is that they require skill, experience and practice. So if someone like me without those three attributes has a go the first few attempts tend to end badly. So in the trade you might give a youngster a scrap cylinder head to practice with. If the OP boat is wood I'd be thinking that my fallback would be to drill all round the screw to extract, then drill a large hole and plug it. New screw could then go in the plug.
|
|
423zero
Really should get out more Joined: 08 Jan 15 Location: United Kingdom Online Status: Offline Posts: 3406 |
Post Options Quote Reply Posted: 18 Jul 19 at 12:00pm |
One inch hole saw, drill down side of screw, then glue in one inch Dowell, prefix mast foot in same place.
|
|
Sam.Spoons
Really should get out more Joined: 07 Mar 12 Location: Manchester UK Online Status: Offline Posts: 3398 |
Post Options Quote Reply Posted: 18 Jul 19 at 3:51pm |
Exactly. The guy in the (excellent BTW) video had it easy with all the tools including access to a lathe to make his drill guides, and sheared bolts with not a sign of corrosion. Not saying he was not skilled and a video of him waiting for penetrating oil penetrating would be worse than one of paint drying but....... If other methods fail then I too would drill oversize and use a plug of new wood too.
|
|
Spice 346 "Flat Broke"
Blaze 671 "supersonic soap dish" |
|
Chris Robinson
Newbie Joined: 02 Oct 07 Location: United Kingdom Online Status: Offline Posts: 2 |
Post Options Quote Reply Posted: 19 Jul 19 at 8:12am |
I agree that the techniques shown in the video are above average boat bimbling level but the purpose of linking it was to show the methods for overcoming problems that others had mentioned. I would imagine that it would not be too hard to make a pre drilled plate which could be screwed into place and would then act as a jig to drill the sheared screws out.
Personally, I like the hole saw suggestion. Simple and effective.
|
|
Sam.Spoons
Really should get out more Joined: 07 Mar 12 Location: Manchester UK Online Status: Offline Posts: 3398 |
Post Options Quote Reply Posted: 19 Jul 19 at 9:14am |
That video is excellent, I didn't want to suggest otherwise.
I agree WRT the hole saw technique if all else fails, an elegant solution.
|
|
Spice 346 "Flat Broke"
Blaze 671 "supersonic soap dish" |
|
Post Reply | Page <123 |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |