Laurent Giles 'Jolly Boat' Exeter |
J24 (Sail No. 4239) Dartmouth |
29er GBR 074 Tynemouth |
List classes of boat for sale |
Custom solid spinn-chute |
Post Reply | Page 123> |
Author | |
Bramble
Newbie Joined: 24 Jan 19 Online Status: Offline Posts: 6 |
Post Options
Quote Reply
Topic: Custom solid spinn-chute Posted: 08 Feb 19 at 2:33pm |
Gentlemen, I'm trying to create a chute for my spinnaker, so it'll be out of the way until needed, and can be hoisted from as close to the bow as possible. No need to suggest alternative ways of launching and lowering, or whose job the kite-handling ought to be. I'm a singlehander in a two-handed class and I've been through it all ad nauseum...
...and I've made on-deck hoops from plumbing-pipe and chutes from old sail fabric, and they were as unsatisfactory as they were unsightly... ...so I want to buy a big piece of solid waste-pipe (solid pipe, I mean, instead of fabric) and install it below the foredeck with a smooth, moulded GRP mouth, and have it leading right back to the middle of the cockpit so the sail is out of sight and mind once it's lowered, and free of snags and tangles. My only question is, what is the narrowest internal diameter I can select when ordering the pipe? My spinnakers vary in size from about 90sq ft to double that. I'm hoping an 8-inch (200mm) pipe will be wide enough - it's much cheaper than the 250mm version. But I don't want the sail jamming in the chute. Any advice? Thanks for reading.
|
|
Guests
Guest Group |
Post Options Quote Reply Posted: 08 Feb 19 at 2:50pm |
20cm would be pretty narrow for a 180 sq ft kite. But it mostly depends on how many patches your kite has and whether you separate them out with spacer knots.
A single patch will lead to less bunching, but will need a longer chute. If you need more patches you can alleviate the bunching by putting stopper knots in the down haul. The other issue you may have with a solid pipe is it won't drain as easy, which is why most kite socks have a mesh bottom.
|
|
JimC
Really should get out more Joined: 17 May 04 Location: United Kingdom Online Status: Offline Posts: 6649 |
Post Options Quote Reply Posted: 08 Feb 19 at 3:29pm |
Also be warned that making a moulded chute was the single most unpleasant boat building task I've ever undertaken. Trying to get the reverse curves and everything else mirror smooth was a nightmare. If I couldn't get a suitable commercial cgute, or afford to get one made then I really wouldn't bother!
|
|
Old bloke
Posting king Joined: 03 Nov 17 Online Status: Offline Posts: 121 |
Post Options Quote Reply Posted: 08 Feb 19 at 4:33pm |
Might be worth trying to find an old dead plywood spinnaker boat ,such as a fireball, and scavenging the chute from that
|
|
Sam.Spoons
Really should get out more Joined: 07 Mar 12 Location: Manchester UK Online Status: Offline Posts: 3398 |
Post Options Quote Reply Posted: 08 Feb 19 at 11:37pm |
The chute mouth is the important bit, the Spice has a mesh sock and the chute is formed by the spaceframe and the bow of the boat, around 8" x 10" at a guess. It's fine for my small kite which is from a Topper Omega and about 13M2 but it is tight for the original Spice 22M2 kite. TBF the Spice kite is pretty well used and not so crispy but the Omega kite is not that much better so my conclusion is that size really does matter.
Edited by Sam.Spoons - 08 Feb 19 at 11:38pm |
|
Spice 346 "Flat Broke"
Blaze 671 "supersonic soap dish" |
|
Bramble
Newbie Joined: 24 Jan 19 Online Status: Offline Posts: 6 |
Post Options Quote Reply Posted: 10 Feb 19 at 1:44am |
I'm grateful for this advice. Reminds me of why I put the chute-idea on the back-burner previously.
Actually a custom chute-mouth may prove even harder to fit than to construct, because the space on my foredeck is limited and there are ribs at close intervals which I don't want to damage. It occurred to me that I could use the inflated tube from a trolley-tyre (or a slightly bigger one) as a mould for a curved above-deck entry to the chute - so that the kite isn't forced to turn any tight angles as it is hauled back into the chute. I'm glad the question of patches was brought up - I had even forgotten that bunching is the problem. I'm thinking that assuming I can find room on board for about 8ft of the 10-ft pipe, I could make it work by adding a grommet (with a patch of reinforced kite cloth) about 5ft above the foot of the kite, and another grommet, midway between that and the head of the sail... ...then attach a retrieval line to the head of the sail...and follow me closely, here...it'll have a stopper knot above the upper cringle about 4ft from the head, and another stopper, about 4ft below the upper stopper, and below the upper cringle...so that the whole sail will be retracted in two bunches, within the 8ft chute, but the position of the knots won't distort the luff when the sail is hoisted. Something tells me that's nicer in theory than it'll be in practice. But looking at the folded kite in the living room, it's no bigger than a plump pillow...surely that'll slide willingly enough inside eight foot of smooth eight-inch dia pipe? Go on, tell me what I don't want to hear.
|
|
JimC
Really should get out more Joined: 17 May 04 Location: United Kingdom Online Status: Offline Posts: 6649 |
Post Options Quote Reply Posted: 10 Feb 19 at 12:20pm |
I don't think I'd have a retrieval at the head, I think that's going to slow hoists. I reckon the traditional all 3 corners lining up at the mouth is probably best. More important than pipediameter to my mind will be friction and making sure the thing is really well polished. Little bits of roughness have a nasty habit of pulling stitching. Note too risk of the downhaul line scoring ruts in the chute mouth. Needs to be solid enough not to cut with rope burn.
|
|
Rupert
Really should get out more Joined: 11 Aug 04 Location: Whitefriars sc Online Status: Offline Posts: 8956 |
Post Options Quote Reply Posted: 10 Feb 19 at 6:03pm |
Rope seems to cut gelcoat very easily, at least on some classes. It may be as much about angles as materials.
|
|
Firefly 2324, Puffin 229, Minisail 3446 Mirror 70686
|
|
Riv
Far too distracted from work Joined: 23 Nov 13 Location: South Devon Online Status: Offline Posts: 353 |
Post Options Quote Reply Posted: 10 Feb 19 at 6:07pm |
Friction is worst bit. Our Laser 2 needs a really good spray of silicone all over the chute area and up the tube to make it all work. Whole thing is really too small.
|
|
Mistral Div II prototype board, Original Windsurfer, Hornet built'74.
|
|
iGRF
Really should get out more Joined: 07 Mar 11 Location: Hythe Online Status: Offline Posts: 6496 |
Post Options Quote Reply Posted: 10 Feb 19 at 6:59pm |
I messed about with this concept for ages and the problem with the solid pipe idea was that it messed with the jib slot and got in the way of it, I used a self tacking jib at the time, the best thing I came up with was a massive opening, which i think is the issue, once the kite is in it'll crush down pretty small it's just getting the whole thing in to start with and it can be prety big and bunched up with the head foot and clew all trying to come together almost simultaneously.
So that thing we made for the V twin worked pretty well, it was one of the actual sucesses of that misdaventure, I'll see if I can't find a picture to attach, nothing you can buy I fear it was made for the purpose. But if it helps prompt something from your head then it'll have been worth it. Edited by iGRF - 10 Feb 19 at 8:14pm |
|
Post Reply | Page 123> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |