Im slowly tracking down the many small leaks in my 300. The latest is right under the mast pot. The gell coat has lots of small holes in it which appear to be part of the leaky problem.

Im unsure as to how i would go about it. The gell coat is so thin in this area that there is no hole to fill. This would mean it wouldn't grip or stick and so would be useless. One option would be to grind out some of the epoxy/resin stuff in the hull to make a hole big enough to fill. Only thing is this is right under the mast base and so the more material i take out the weaker it would become and lets face it, the mast pot is pretty essential.

Any advice and past experiences here would be greatly appreciated.

Cheers Tom

Gel coat is more of a cosmetic finish so as its under the mast base I'd just pour some epoxy resin in while its still very fluid and try and level it out - will do it itseld if the boat is level.