Print Page | Close Window

Rebuilding the Mainsheet tower.

Printed From: Yachts and Yachting Online
Category: General
Forum Name: Repair & maintenance
Forum Discription: Questions & tips on the subject
URL: http://www.yachtsandyachting.com/forum/forum_posts.asp?TID=2936
Printed Date: 16 Aug 25 at 9:24pm
Software Version: Web Wiz Forums 9.665y - http://www.webwizforums.com


Topic: Rebuilding the Mainsheet tower.
Posted By: jpbuzz591
Subject: Rebuilding the Mainsheet tower.
Date Posted: 07 May 07 at 4:51pm

I recently brought a contenderr but was told that supports holding the mainsheet tower had been added and this was against class rules (see pic below). So I need to rebuild the tower, and was told from the yahoo group the best option would be to rebuild the mainsheet tower from epoxy and carbon fibre. But as I havent had any experience with using them before, has anyone got any tips?

 



-------------
Jp Indoe
Contender 518
Buzz591
Chew Valley Sailing club
Bristol



Replies:
Posted By: JimC
Date Posted: 07 May 07 at 5:04pm
Read the Cherub web site is a good start...


Posted By: Jack Sparrow
Date Posted: 07 May 07 at 5:47pm
Or go on a carbonoloogy.com training course.

http://www.carbonology.com/shop.asp?PC_ID=3233&pf_id=94&sec_id=2116 - clicky




-------------
http://www.uk3-7class.org/index.html" rel="nofollow - Farr 3.7 Class Website
https://www.facebook.com/groups/1092602470772759/" rel="nofollow - Farr 3.7 Building - Facebook Group



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.665y - http://www.webwizforums.com
Copyright ©2001-2010 Web Wiz - http://www.webwizguide.com