Print Page | Close Window

400 advice please

Printed From: Yachts and Yachting Online
Category: General
Forum Name: Repair & maintenance
Forum Discription: Questions & tips on the subject
URL: http://www.yachtsandyachting.com/forum/forum_posts.asp?TID=12096
Printed Date: 13 May 25 at 10:13pm
Software Version: Web Wiz Forums 9.665y - http://www.webwizforums.com


Topic: 400 advice please
Posted By: piglet
Subject: 400 advice please
Date Posted: 24 Jul 15 at 12:33pm
OK, just bought No.1133 and need some class specific advice please:
The boat hasn't been used a lot from new but has been stood for years.

Kite halyard, fashion seems to be around the back but why?
The current halyard doesn't go round the back and is well manky anyway.
So, how long? and which is the best 4mm Dyneema? Think we've got Marlow on the 200 but someone had a new one the other day that looked a tiny bit thinner and seemed to run really well.



Replies:
Posted By: gordon1277
Date Posted: 24 Jul 15 at 5:30pm
Hi Piglet
I used to run my spinnaker halyard round the back as I sailed with lots of pick up crews and it gave me a chance to help whilst they learnt.
All the boats at our club now run them to a block on top of the centre board case tied under the thwart.
Lovely boats apart from the crew hassle and being to heavy I would still race one.
Gordon

-------------
Gordon
Lossc


Posted By: PaulPoshW
Date Posted: 24 Jul 15 at 5:35pm
The halyard going round the back is usually done so the Helm could help with the hoist. Maybe for a junior crew? Not a normal routing for the 400 from memory. If the crew doesn't need help then keep the rope up front.

Some like http://www.force4.co.uk/department/chandlery-above-deck/rope-rigging-splicing/rope/gottifredi-maffioli-evolution-race-78-m.html#.VbJnmPlViko" rel="nofollow - Maffioli Evolution Race 78 makes a good kite halyard. Nice and soft, cleats well and runs well. Thinner line would work but tends to be much harder on the hands when the wind gets up. 4mm has always been my choice when at the front of a boat.

How long... Sorry can't help much there. I'd suggest google or someone on here may have a better idea.


Posted By: piglet
Date Posted: 24 Jul 15 at 7:56pm
Thanks Paul, we've got 5mm Evo for kite sheets on the 200 and it's good, very slightly thinner than the equivalent Marlow.

Gordon, do you mean a turning block at the back of the case opening at the front edge of the thwart?
The boat will be sailed by my strapping son and his 9' tall mate, so I can't see the need for round the back, just more string round the helms ankles.


Posted By: gordon1277
Date Posted: 26 Jul 15 at 2:15pm
Hi Piglet
As you discribed for the halyard.
Some people have this on thick bungee.
Good sailing I just hope your water is calmer than the Solent yesterday when all the idiots blasted through our course on the way back from the Americas cup off Southsea. It seemed to be a race to see who could reach Hamble river first and sod anybody else. Some scary moments. Also some courteous people who tacked or bore away etc to avoid causing grief but the wash was incredible at times.

-------------
Gordon
Lossc



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.665y - http://www.webwizforums.com
Copyright ©2001-2010 Web Wiz - http://www.webwizguide.com