Repair & maintenance: That contender again

Print Page | Close Window

That contender again

Printed From: Yachts and Yachting Online
Category: General
Forum Name: Repair & maintenance
Forum Discription: Questions & tips on the subject
URL: http://www.yachtsandyachting.com/forum/forum_posts.asp?TID=11174
Printed Date: 14 May 25 at 1:27am
Software Version: Web Wiz Forums 9.665y - http://www.webwizforums.com

Topic: That contender again

Posted By: Chimp
Subject: That contender again
Date Posted: 29 Oct 13 at 11:31am

Hello

the pins that the rudder hangs off on the boat seem a bit wobbly-or at least have movement whats the best way to sort this out?

-------------
Hello

Replies:

Posted By: GybeFunny
Date Posted: 29 Oct 13 at 12:20pm

Tighten up the screws holding them in place?

Posted By: jeffers
Date Posted: 29 Oct 13 at 12:50pm

Through bolt it, preferably replacing rhe plywood pad behind first (if there is one there).

-------------
Paul
----------------------
D-Zero GBR 74

Posted By: robin34024
Date Posted: 29 Oct 13 at 7:58pm

do you mean that the pintles (pins) that the rudder hangs on are loosely attatched to the boat and rattle, or that the gudgeons (holes) on the rudder just fit loosely to said pins?

-------------