New Posts New Posts RSS Feed: Mainsheet bridles
  FAQ FAQ  Forum Search   Register Register  Login Login

Mainsheet bridles

 Post Reply Post Reply Page  <12
Author
RS400atC View Drop Down
Really should get out more
Really should get out more


Joined: 04 Dec 08
Online Status: Offline
Posts: 3011
Post Options Post Options   Quote RS400atC Quote  Post ReplyReply Direct Link To This Post Topic: Mainsheet bridles
    Posted: 21 Jan 15 at 8:13pm
Don't contenders use a block floating on the bridle?
I think there is a balance between allowing independent control of sheeting in and leach tension, vs wanting to control both together?
As you ease the sheet in a gust, you want to allow a little more twist?
Back to Top
Woodbotherer View Drop Down
Posting king
Posting king
Avatar

Joined: 11 Dec 14
Online Status: Offline
Posts: 192
Post Options Post Options   Quote Woodbotherer Quote  Post ReplyReply Direct Link To This Post Posted: 22 Jan 15 at 9:41am
Originally posted by Do Different

Probably floating would be best, very rarely does a mono rig need sheeting to the centreline. Centre lining the boom may possibly give the feel of pointing high but is usually slower and perhaps even result in a lower course because even though the boat is pointing high the foils are moving so slowly they are stalled and making lots of leeway.   

I think this is what happens. I fixed a pulley block centrally on spectra line tied off to the ends of the rack tracks. When I saw the Punk I was going to try and fashion something along the lines of that but in the end a nasty clew first stack and  the nose of the boat somehow getting between the boom end sheet and the stern convinced me after a nightmare trying to sort it all out in the water, to go back to centre sheeting.
Back to Top
JohnJack View Drop Down
Far too distracted from work
Far too distracted from work


Joined: 12 Mar 13
Online Status: Offline
Posts: 246
Post Options Post Options   Quote JohnJack Quote  Post ReplyReply Direct Link To This Post Posted: 22 Jan 15 at 12:23pm
It works a bit differently on the Laser IMHO. 
Before the new kicker arrangement you would to some extent control mast bent with the main sheet (maybe this is an un-stayed rig thing).
Upwind is always block to block bending the mast as much as possible
(probably a bit different now there is sensible purchase on the kicker).

The Laser rig is also pretty unsophisticated and I don't think the same level of thought was put into it as the likes of the Zero, Aero, Blaze etc etc (modern boats).

Also being a strict One Design, not much changes quickly (eg the sail) 
Back to Top
PeterV View Drop Down
Posting king
Posting king
Avatar

Joined: 24 Feb 07
Location: United Kingdom
Online Status: Offline
Posts: 131
Post Options Post Options   Quote PeterV Quote  Post ReplyReply Direct Link To This Post Posted: 22 Jan 15 at 12:30pm
The Laser is a bit different.  Before the new kicker came in the sheeting angle couldn't be adjusted, if the bridle was eased the angle reduced but then it was too narrow, so the bridle was always tight.  Since the new kicker it's been possible to tighten the kicker and ease the main, increasing the sheeting angle whilst still keeping a flat sail and this has allowed more efficient sailing in stronger winds.
PeterV
Finn K197, Finn GBR564, GK29
Warsash
Back to Top
 Post Reply Post Reply Page  <12

Forum Jump Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.665y
Copyright ©2001-2010 Web Wiz
Change your personal settings, or read our privacy policy